Direct Type CO2 Suppression System Fire Detection Tube with 25m Maximum Length and 12.1Mpa Maximum Pressure

Fire Detectors/Fire detection tube

What is a fire detection tube?
Electric equipment fire suppression systems have been specifically designed to protect electric equipment and put out electric fires caused by leakage electric (class E fire) quickly andefficiently.
These self contained pneumatic systems require no external energy or power supply. Upon flame impingement or heat, thepressurized detection tubing will burst and activate the cylinder valve to open and release the extinguishing agent.
Electric equipment fire suppression systems are specifically designed to extinguish fires of electric panel, battery bay, control panel, electric equipment etc. It is developed to prevent damage of equipment, records, people and other assets that are vital to a business.
Carbon Dioxide(co2) suppression system is extremely versatile and effective on a wide range of flammable and combustible materials and approved for Class A, B and C hazards. Here are three models with different head valve.

Products Features:
Applied to the relatively closed space effectively.
Full automatic heating start, no electricity.
Simple installation and maintenance.
Special for Electric Equipment.

Products Application: The temperature-sensing automatic fire extinguishing device has solved the long-standing fire prevention problem that has plagued the fire protection industry in Spaces prone to fire hazards such as electrical equipment, control boxes, and distribution boards. At present, this device has been widely applied in power plants, communications, radio and television, petrochemical, railway and other systems in China, accumulating a wealth of successful experience. It is suitable for extinguishing fires in the following places: The microwave machine room, decimeter wave machine room, meter wave machine room, transformer and distribution room and uninterruptible power supply room within the radio and television transmission tower; The program-controlled switch room, control room and signaling transfer point room of the communication system; The control room, electronic equipment room, computer room, relay room and transformer and distribution room of the power plant; Cable crossing, dense and intermediate connection points, etc. Transformer and distribution cabinets, elevator control cabinets, wire and cable troughs or cable trays with trough boxes; Special or important cabinet equipment with relatively sealed enclosures in other places. Types of fires applicable for extinguishing: 1. The automatic fire extinguishing device with carbon dioxide filled fire detection tubes can be used to fight the following fires: Combustible gas fires where the gas source can be cut off before extinguishing the fire; Class A, B and C liquid fires or fires involving fusible solids such as paraffin and asphalt; Solid surface fires and deep-seated fires of some solids such as cotton, wool, fabrics and paper; Electrical fire. 2. Automatic fire extinguishing devices with fire detection tubes filled with carbon dioxide shall not be used to fight the following fires: Fires involving chemical products containing oxidants such as nitrocellulose and gunpowder; Fires involving active metals such as potassium, sodium, magnesium, titanium and zirconium; Fires involving metal hydrides such as potassium hydride and sodium hydride.

How does it work?
The fire detector, originating in Europe, is a simple, low-cost, and highly reliable independent automatic fire extinguishing system. It does not rely on any power source; it operates solely on its own pressurized power. This system is primarily designed for enclosed spaces such as electrical control boxes and machine rooms. The fire detector fire extinguishing device consists of a pressurized fire detector connected to it, which detects the fire and delivers the extinguishing medium to the protected area through the fire detector itself (direct system) or nozzles (indirect system).
The fire detector is a new product developed in the high-tech field, combining long-term leak resistance, flexibility, and effective temperature sensing. The main components of the fire detection system are designed and manufactured under a strict quality control system. This product can use various extinguishing media, such as dry powder extinguishing agents, HFC-227, HFC-236 (low pressure), and carbon dioxide extinguishing agents (high pressure).
The fire detection device can instantly and effectively extinguish fires and has the following advantages:
★ Unique extinguishing effect, effectively extinguishing fires in their early stages. The device automatically activates upon contact with fire, requiring no power supply or manual operation.
★ Ideal for unattended equipment and locations requiring intensive protection.
★ Rapid detection response time, reducing losses caused by the spread of fire.
★The fire detection tube is unaffected by location and can be inserted into various complex flammable spaces or equipment.

This fire extinguishing system uses a pressurized non-metallic hose that automatically bursts within a certain temperature range, spraying extinguishing agent or transmitting fire signals. This hose is directly placed at the potential ignition point and acts as a fire detection element. At a temperature of 160°C, the hose automatically bursts due to internal pressure, creating a spray hole that directly sprays the extinguishing agent to the fire source. The system responds quickly and accurately, releasing extinguishing agents more promptly and effectively, resulting in stronger targeted and effective fire suppression. It can quickly and effectively detect and extinguish fires in their initial stages, making it an early-stage fire suppression system. This represents a significant advancement compared to traditional fixed gas fire suppression systems and dry powder fire suppression systems, which only extinguish fires in entire rooms or large spaces after they have already spread.

The fire detection tube is essentially a linear detector, capable of both detecting fire and releasing extinguishing agents. Due to the small amount of extinguishing agent used, it reduces pollution and damage to the surrounding environment, significantly lowering the cost of each firefighting operation.
Installation is simple and it occupies minimal space.
The simple design minimizes installation and maintenance costs. It is not fully submersible, so release will not harm personnel in the protected area.
It will not cause false alarms or accidental releases due to oil, dust, etc.
This device has no electrical components, and its operation is unaffected by vibration or impact. Because the fire detection tube is a flexible tube, it can be placed arbitrarily at various wiring locations. This feature fills the gap in existing fire protection products that cannot extinguish this type of fire source.

How to order?
Contact us and we will provide you with our product models and specific information.
Tell us the model you need, the model you require customization for, and the quantity, and we will provide you with a detailed quote.
If you are unsure which model you need, please tell us your fire safety space information, and we have a dedicated designer to assist you.
Finally, we also offer professional logistics to provide you with one-stop service.
Why choose us?​

About Us:
  Guangzhou Xingjin Fire Equipment Co., Ltd. is a professional enterprise dedicated to the research, development and production of HFC-227ea (FM200), Novec1230, CO2 and inert gas products. For many years, the company has been committed to improving product quality, enriching product varieties and optimizing product specifications.
  At present, our company's popular FM200 products are widely used, such as: pipe network FM200 fire extinguishing system, cabinet FM200 fire extinguishing system, automatic FM200 fire extinguisher (ceiling type), fire detection tube fire extinguishing system, and automatic fire extinguishing pipe. In addition, our inert gas fire extinguishing systems are also becoming increasingly popular, such as the IG541 (nitrogen) fire extinguishing system, IG100 (nitrogen) fire extinguishing system, and IG55 (argon) fire extinguishing system. Due to our high-quality products and services as well as our good reputation, our company is highly praised by customers all over the world.

Our factory:
  The factory is divided into multiple areas, mainly used for the production of gas cylinders, gas filling, product inspection, goods packaging, storage of goods, sample display, etc. We have our own professional production and testing equipment, such as bottle washing machines, dryers, valve loaders, gas filling machines, etc

Our products:
  HFC-227ea (FM200), Novec1230, CO2 and inert gas series products (such as pipe network, suspended, external pressure storage, cabinet, integrated cabinet, fire detection pipe, portable fire extinguisher, gas cylinder), fire extinguishing pipe, complete alarm system, foam fire extinguishing series (such as vertical/horizontal foam tank, foam agent, filling machine, fire cannon), hot aerosol and other fire extinguishing equipment .

Our services:
   We have a professional and mature team, including a solution design team, a skilled installation team, a quality inspection team and an after-sales service team.
 

Our honors:
   Since its establishment in 2010, the company has won numerous praises and honors. In 2014, it was awarded the title of "AA-level Credit Company" by the China Fire Protection Association. In addition, all of our products have passed the CCC test and have relevant certificates for each product.
 

The main market:
  Our target customers are people all over the world who need fire-fighting equipment. So far, we have rapidly developed the market in Southeast Asia, the Middle East and Africa, and have received high praise from a wide range of customers. In the coming years, we will strive to explore other foreign markets.

We are ready for challenges, so please do not hesitate to send an inquiry to us!