Long Range Video Wireless IP Radio System with 64 Nodes and 10Watts/20Watts for Long Distance Transmission

• Networking: Point-to-Multipoint (PTMP) star topology.

• MIMO: 2x2 configuration for enhanced throughput and link reliability.

• Frequency Options:

  • Standard bands + optional 1.4 GHz or 600 MHz (suitable for long-range NLOS).

• Bandwidth Flexibility: 1.4/3/5/10/20/40 MHz (adaptable to interference/range needs).

• Max Output Power: 2x 33 dBm (2W per radio chain).

• Range: 10–30 km (ground-to-ground, line-of-sight)

• Interface: 1*RJ45+1*Power Input +2*RF Antenna
• Support WEBUI for network management and parameter configurable.
• Automatic power control
• Automatic frequency point control

IWAVE self-developed MESH network management software will real time show you the topology, RSRP, SNR, distance, IP address and other information of all the nodes. The software is WebUi based and you can login it anytime anywhere with IE browser. From the software, you can configure the settings per your requirement, such as working frequency, bandwidth, IP address, dynamic topology, real time distance between nodes, algorithm setting, up-down sub-frame ratio, AT commands, etc.

CA(Carrier Aggregation) technology

It adopts carrier aggregation technology CA technology

1. Supports a larger total bandwidth, supports 20MHz+20MHz carrier aggregation, and the data transmission peak rate exceeds 100Mbps.

2. Supports continuous carrier aggregation and non-continuous carrier aggregation, which is more flexible.

3. Supports carrier aggregation of different bandwidths, and can adjust the bandwidth of carrier aggregation

according to environmental interference and available spectrum resources, making it easier to adapt to different scenarios.

4. Retransmit on different carriers to avoid data interruption after a single carrier is interfered.

5. Supports frequency hopping of different carriers to more effectively find interference-free carriers.