4K FHD Video Wireless Transmitter Module 100Mbps FHSS Star Network

4K FHD Video Wirless Transmitter Module

Introduction

The FDM-6800 point to multipoint Digital 4k FHD Video Wireless Transmiter for nlos range, point to 64units points, high sensitivity, high power, 2X2 MIMO wireless OEM solution. Its robust digital data link provides a robust and secure link in the software selectable 566Mhz-626MHz and 1420Mhz-1530MHz frequency bands. In complex RF environment, its automatically frequency hopping between different bands makes it have strong antiblocking and anti-interference performance.

The FDM-6800 was designed based on the TD-LTE technology standards and SOC chips to achieve robust RF performance with first-class sensitivity. Even though the signal is weak, the wireless link between nodes is still stable and reliable.

The miniature, lightweight and robust design allows the FDM-6800 to be an ideal candidate for size sensitive applications. The high speed, nlos long range capabilities of the FDM-6800 allow for high quality wireless video and telemetry communications.

Key Features

Data Rate: 100Mbps(UL/DL) 2x2 MIMO Up and down time slot ratio-2D3U/3D2U/4D1U/1D4U 566Mhz-626MHz and 1430Mhz-1530MHz- Software Selectable Bandwidth 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz(default), 40Mhz(Option) Frequency hopping across frequency bands for Anti-interference Adjustable Total Output Power (23dBm±2) Point-to-Point, Point-to-Multipoint(1 Central node supports 64 sub-node) Simultaneous IP & full duplex Serial Data Baud rate 115200 ZUC, SNOW3G, AES128 Encryption Modulation QPSK, 16QAM, 64QAM Configurable via network management software, web browser Sensitivity-103dBm/10Mhz Local/Remote firmware upgrades End to end 30ms latency Automatically initiate a re-establishment of the link after link failure Working Temp (-20°C to +75°C) Extremely Small size: 133*80*35mm(SMA Port included)

Application Of Unmanned System

• Ethernet Wireless Extension

• Wireless Telemetry

• NLOS Wireless Video Transmitting

• Control Systems

• UAVs, UGVs, AUVs

Specification

  WHO WE ARE?

The original standard LTE network requires the participation and control of base stations and core networks in addition to terminals. Now each node of our star topology network devices and MESH network devices is a terminal node. These nodes are lighter and retain many advantages of the original LTE technology. For example, it has the same architecture, physical layer and subframe as LTE. It also has LTE’s other advantages such as wide coverage, high spectrum utilization, high sensitivity, high bandwidth, low latency, and dynamic power control.

Compared with normal wireless link, such as wireless bridge or other devices based on wifi standard, the LTE technology has a subframe structure, the uplink and downlink data rate is not same. This characteristic enable the wireless link products' application more flexible. Because the uplink and downlink data rate can be adjusted based on real service requirements.

In addition to the self-developed product series, IWAVE also has the ability to integrate upstream and downstream product resources in the industry. For example, based on self-developed 4G/5G industry products, IWAVE integrates wireless terminal products and industry application platforms, thereby providing terminals - base stations - core networks - End-to-end customized products and industry solutions for industry application platforms. IWAVE focuses on serving domestic and foreign industry partners, such as special industry communications fields such as park ports, energy and chemicals, public security, special operations, and emergency rescue.

HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?