Cable Sheath Fault Locator Advanced Technology for Quick and Accurate Cable Fault Detection

Product Description

With the full deployment of the urban network transformation, many power supply bureaus, construction parties, and even design units encountered 110kV XLPE cables for the first time. Due to time constraints and insufficient experience, many cables failed to pass the withstand voltage test (10kV/ 1min).

At present, most of the outer sheath is made of HDPE sheath material, which has passed the DC 25kV/5min withstand voltage test in the factory, and the leakage current is as low as tens of μA. Therefore, most of the defects after laying are caused by external force damage during laying, including soil filling and cover. Defects after operation usually include termite bites; water in the grounding box; deterioration of the original defect; moisture penetration of the bifurcated part of the grounding wire reduces the insulation resistance, etc., sometimes because the cable is buried too deep or the surrounding conditions are complicated, so It is very difficult to locate, and some defects cannot be resolved after many years, leaving hidden dangers to the operation.

The output voltage of the high-voltage cable outer sheath fault detector is 10KV and below, which fully meets the Chinese national standard GB50150-2006 cable outer sheath withstand voltage test regulations, including the cable outer sheath handover test and preventive test suitable for cross-interconnect systems And the fault location of the outer sheath of the cable. Quickly and accurately find hidden dangers of 10kv-500kv single-core and three-core high-voltage and ultra-high voltage cable outer sheath grounding faults and large leakage currents.

At the same time, it can perform 5kv-10kv on high-density polyethylene and polyvinyl chloride cable outer sheaths, 1 The minute DC withstand voltage test is a special instrument necessary for the maintenance of cable equipment of 10kv-500kv single-core and three-core high-voltage and ultra-high voltage cable operation units, ultra-high voltage cable engineering companies, and various power transmission and transformation engineering companies.

Main features

Voltage adjustable. Frequency adjustable. Over current protection. Pin-pointing and withstand testing switched by one button , the receiver sensitivity can be adjust. Signal frequency adjustable, and zero protection. The test range without blind area The receiver sensitivity is adjustable Signal frequency is adjustable

On-site testing

Xi'an Xu&Hui Electromechanical Technology Co., Ltd. /Xian XZH Electric Power Technology Co., Ltd. has found in 2013, located in Xi'an, China. which is a highly experienced team dedicated to developing electrical measurement instrument, the product line covers a wide range of devices for testing various electrical area, such as underground cable fault locating system, power transformer test, AC/DC Hipot test, Insulation resistance test and so on. With rich measurement experiences of innovation combining and advanced technology to provide the most reliable electrical measurement.

The design development production and Inspection is performed at the ISO 9001 and CE which gurantee a consistency of high quality products. XZH TEST masters a variety of technologies as well as extended service and support to deliver the highest value to our customers.

We sincerely hold the tenet of "quality first, customers supreme, honor commitment trust worthy".Stays commitment R&D about electric power detection equipment and electric power automation, since its foundation, the company keeps living up to the belief of: "Create high-quality brand, casting first-class enterprise image". Also, we make the "steady development, the best quality "as the core concept of the enterprise.

Our goal is to provide our customers with reliable test and measurement equipment that more safe and easy to use, we make measurement easier!

Xi'an Xu & Hui Electromechanical Technology Co., Ltd expect to strengthen the relationship with world-wide cooperators, and warm-heartedly welcoming business partners to visit our factory for developing the OEM & ODM win-win Cooperation.

Our Team

Factory scene

Training is a core course for all the members and we will organize various trainings to help us to improve our abilities and Let us find the beauty of life. We treasure the time we are learning and studying together.

Services

  We have the ability to innovate new products and technologies.

  We can provide complete system solutions for your project.    

  We provide online and offline practical and theoretical training.

  We provide instrument repair and calibration.

Certification