ASTM A179 Carbon Steel Low Fin Tube For Heat Exchanger and Economizer

A179 Low Fin Tube Strength

1. Factors Contributing to Strength

• Low Carbon Content: The low carbon content (up to 0.06%) provides good weldability and formability while maintaining adequate strength.
• Seamless Construction: A179 tubes are seamless, which eliminates weak points such as weld seams, enhancing overall strength.
• Fin Design: The low fins are integrally formed on the tube, ensuring a strong bond between the fins and the base tube.

2. Mechanical Properties at Elevated Temperatures

• Temperature Range: A179 Low Fin Tubes are designed for use in low to medium-temperature applications (typically up to 450°C or 842°F).
• Creep Resistance: While not as high as alloy steels, A179 tubes perform well in moderate-temperature environments.
• Oxidation Resistance: The material has moderate oxidation resistance, but prolonged exposure to high temperatures may reduce strength over time.

3. Pressure Handling Capability

• Hydrostatic Testing: A179 tubes are tested hydrostatically to ensure they can withstand the required internal pressures without failure.
• Pressure Rating: The pressure rating depends on the tube's wall thickness and diameter, but A179 tubes are generally suitable for moderate-pressure applications.

4. Comparison with Other Materials

• A179 vs. Stainless Steel: Stainless steel tubes (e.g., A213 TP304/TP316) offer higher strength and corrosion resistance but are more expensive.
• A179 vs. Alloy Steels: Alloy steels (e.g., A213 T11/T22) provide better high-temperature strength and creep resistance but are less cost-effective.

A179 Low Fin Tube FAQ

1. What are the key features of A179 Low Fin Tubes?

• Material: Made from ASTM A179 low-carbon steel, known for its excellent thermal conductivity and cost-effectiveness.
• Fin Height: Low fins (typically 0.8 mm to 1.5 mm) are integrally formed on the tube.
• Applications: Ideal for low to medium-temperature heat exchange applications.
• Corrosion Resistance: Suitable for non-corrosive or mildly corrosive environments.

2. What are the typical applications of A179 Low Fin Tubes?

• Heat Exchangers: Used in shell-and-tube heat exchangers for industries like power generation, chemical processing, and HVAC.
• Boilers: Employed in economizers to recover waste heat from flue gases.
• Condensers: Used in condensers for power plants and refrigeration systems.
• Oil and Gas: Applied in heaters, coolers, and condensers for hydrocarbon processing.
• Refrigeration: Used in evaporators and condensers for efficient heat exchange.

3. What are the limitations of A179 Low Fin Tubes?

• Corrosion Resistance: Not suitable for highly corrosive environments unless additional protective coatings are applied.
• Temperature Limits: Best suited for low to medium temperatures; not ideal for extremely high-temperature applications.
• Fin Height: Low fins may not provide as much surface area as high-fin tubes for certain applications.

4. How do I select the right A179 Low Fin Tube for my application?

• Operating Temperature: Ensure the tube is suitable for your temperature range.
• Environment: Consider the corrosiveness of the environment and whether additional coatings are needed.
• Heat Transfer Requirements: Choose the fin density and tube size based on your heat transfer needs.
• Pressure Rating: Verify that the tube can handle the system's pressure requirements.

5. How do I maintain A179 Low Fin Tubes?

• Regular Cleaning: Remove fouling or deposits to maintain heat transfer efficiency.
• Inspection: Check for fin damage or corrosion periodically.
• Leak Testing: Perform hydrostatic or pressure tests to ensure integrity.

Summary

A179 Low Fin Tubes are a cost-effective and efficient solution for heat transfer applications in low to medium-temperature environments. Their low-height fins enhance heat exchange while maintaining a compact design, making them ideal for use in heat exchangers, boilers, condensers, and more. However, they are not suitable for highly corrosive or extreme-temperature conditions without additional modifications. Always consult with a manufacturer or engineer to ensure the right fit for your application.

Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories,  the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always.   The factories already got certificates like : ABS, LR, DNV-GL, BV, KR, CCS, ASME, ISO 9001, ISO14001, ISO18001, ect.

Our factories main products as below : 
Factory 1th: Stainless steel seamless tube, Duplex steel seamless tube, Super duplex steel seamless tube, Nickel alloy steel seamless tube;

Factory 2th: Carbon steel seamless tube, Alloy steel seamless tube; Enhanced Heat Tranfer Tube, low fin tube ,U bending workshop;
Factory 3th: High frequency welding fin tube(HFW fin tube, Solid Fin tube, Studded Tube, Serrated Fin tube, Longitudinal welding fin tube), Wound fin tube(L type fin tube, LL type fin tube,  KL type fin tube), Embedded G type fin tube , Extruded fin tube,  low fin tube, U bend & 180deg. Return;

Yuhong Holding Group also has gained rich experience for project package( products contain:Pipes, Fittings, Flanges, heat exchanger, furnace, fired heater, air cooler, boiler) , YUHONG brand has marked its global presence in more than 85 countries, like, Korea, USA, Canada, Mexico, Colombia, Bolivia, Chile, Argentina, Brazil, Ecuador, Austria, New Zealand, Singapore, Malasyia, Indonesia, Thailand, Vietnam, Ukraine, Turkey,Sauid Arabia, Qatar, U.A.E,Israel,India, UK, France, Italy, Gernmany, Poland, Spain,... We have successfully implemented the orders of Cross Country Pipelines for our valuable customers. In addition, we have also developed a huge network of contacts and strategic alliances with most important manufacturers as stockists around the world.