Special Purpose Vehicle Rubbish Transfer Semi-trailer or Use for Bulk Grain Transport

Special Purpose Vehicle Rubbish Transfer Semi-trailer or Use for Bulk Grain Transport

ubbish Transfer Semi-trailer or Use for Bulk Grain Transport Features:

• Used for transporting materials such as gravel, sand, sawdust, bulk coal, slag, asphalt particles and so on.
• Low centre of gravity, safer: the box adopts round arc-shaped carriage, the upper and lower are of equal width, even loading, low centre of gravity, strong stability, crawler type unloading, no need to lift to unload, safer than traditional lifting unloading.
• Reliable function and higher strength: the box is made of wear-resistant plate and high-strength material, frame structure, with 2-3 centre columns on each side to prevent expansion of the box. The bottom conveyor belt is made of thickened and high strength conveyor belt, which has certain impact toughness and is more durable. Push plate back and forth independent hydraulic control, the front plate wire rope is thickened twine oil lifting wire rope, take straight pull, straight release type, long service life, easy to replace.
• Unloading fast, clean and no residue: the use of conveyor belt and push plate together with flat push type unloading, the whole unloading about 1 minute. Push plate and the side of the spring flexible transition between the board, fit tightly, good sealing, scraping more clean, discharge less residue, good adaptability to changes in the medium.
• Intelligent and humanised: it can be operated by one key in the driver's cab and unloaded remotely, which is convenient and humanised. The proximity switch line is a connector, preventing the electromagnetic induction switch from interfering when pulling iron ore. There is a cover plate at the front of the top cover to prevent the material from falling into the compartment and the hydraulic winch when loading.
• Hydraulic system: It adopts famous brand piston pump, hydraulic valve group, motor and large speed ratio reducer, featuring strong power and reliable performance. The rear door cylinder is protected with sheath to prolong the service life of the cylinder.

Product Parameter

Detailed Picture

CHONGQING BIG SCIENCE & TECHNOLOGY DEVELOPMENT CO., LIMITED, We are a well-known international auto manffacturer and oversea auto investment corporation in China.

Our mission is to focus on overseas investment in automotive assembly plant chain projects.Our investments include capital and automotive manufacturing technology, brands, key equipment,kit car spare parts and credit support under guarantee conditions.We are a joint venture corporation control by China national automobile corporation and China financial capital investment corporation.The Chinese government has proposed "One Belt And One Road".Chinese carmakers are keen to "go global".While helping developing countries to achieve industrialization, we should also develop ourselves.http://chainautoassembly.com is also another official site of ours.

There are two ways to develop the automobile industry.One is large-scale investment, as many large multinationals do.Its advantage is effective, high efficiency.But not for developing countries.Developing countries should find a suitable way to develop automobile manufacturing.It's a small investment, a small step.After more than ten years of exploration, we believe that the theory of "climbing the stairs" is more suitable for the actual situation of developing countries.The key to the development of China's overseas chain automobile project is to make orderly investment step by step, from quantitative change to qualitative change, and realize the strategic goal of industrialization.