Special Purpose Vehicle Self-dumping Rubbish Truck C5 With Big Capacity

Special Purpose Vehicle Self-dumping Rubbish Truck C5 With Big Capacity

Product Features:
1. used for the transport of sludge, gravel, coal, slag and other materials.

2. Light dead weight: through CAE auxiliary analysis for lightweight design, the dead weight is lighter, about 1.5-2 tonnes lighter than the conventional tipping trucks, which saves fuel consumption and low cost.

3. High strength: the box is made of 510/600/700 high-strength and NM400/NM450 high-wear-resistant special steel (the highest strength can be up to 1450Mpa), which makes the box stronger and more beautiful in appearance, and the product has a higher value.

4. Good stability: low centre of gravity design, 60mm lower than the conventional cargo box, in the case of the same speed braking, the vehicle is more stable, to achieve all-weather conditions of different operating scenarios to easily cope with.

5. Clean unloading: the box body adopts U-shape design, the side plate and the bottom plate are folded into shape, the interior is smooth without hanging materials, and the unloading is smooth and easy to flush.

6. Safety and environmental protection: Combined with the concept of environmentally friendly urban transport, it can be equipped with tarpaulin or metal (iron/aluminium alloy optional) sealing roof in compliance with regulations. The top cover adopts the domestic top design, the inner and outer groove structure is more durable, when the environmental protection cover is not closed tightly, the engine can only idle, can not be normal refuelling normal driving, to ensure safety.

7. Large volume: Larger volume rate, higher yield, about 0.2-0.5 cubic metres increase in volume compared with ordinary compartments.

Product Parameter

Detailed Picture:

CHONGQING BIG SCIENCE & TECHNOLOGY DEVELOPMENT CO., LIMITED, We are a well-known international auto manffacturer and oversea auto investment corporation in China.

Our mission is to focus on overseas investment in automotive assembly plant chain projects.Our investments include capital and automotive manufacturing technology, brands, key equipment,kit car spare parts and credit support under guarantee conditions.We are a joint venture corporation control by China national automobile corporation and China financial capital investment corporation.The Chinese government has proposed "One Belt And One Road".Chinese carmakers are keen to "go global".While helping developing countries to achieve industrialization, we should also develop ourselves.http://chainautoassembly.com is also another official site of ours.

There are two ways to develop the automobile industry.One is large-scale investment, as many large multinationals do.Its advantage is effective, high efficiency.But not for developing countries.Developing countries should find a suitable way to develop automobile manufacturing.It's a small investment, a small step.After more than ten years of exploration, we believe that the theory of "climbing the stairs" is more suitable for the actual situation of developing countries.The key to the development of China's overseas chain automobile project is to make orderly investment step by step, from quantitative change to qualitative change, and realize the strategic goal of industrialization.