High Quality Materials 100% 3K Plain Matte Carbon Fiber Plate High Gloss

High Quality Materials 100% 3K Plain Matte Carbon Fiber Plate – High Gloss

Our Carbon Fiber Panels are constructed with the same certified carbon fiber that is currently used in state-of-the-art aircraft and sailing yachts. ?With the use of certified T-300 carbon fiber fabric, all of our carbon fiber panels are made to the highest standards in both manufacture and material.

Carbon fiber panels have physical properties that are similar to steel. However, the stiffness of carbon fiber is superior to that of an equivalent piece of steel while also remaining much substantially lighter and is similar to plastic in weight. This gives the carbon fiber panels a much higher strength-to-weight ratio by comparison.

INFORMATION ABOUT CARBON FIBER SHEETS

Carbon fiber, also known as carbon graphite or CF is a material made up of thin fibers composed mainly of carbon atoms. These fibers are extremely strong for their size due to the microscopic crystal alignment of the carbon atoms. Carbon fiber is made by twisting several thousand carbon fibers together to form a tow, which can be used alone or woven into a fabric. The fabric can be combined with a thermoplastic resin and molded or wound to create composite parts such as CFRP, which offers a high strength-to-weight ratio. Carbon fiber has several weave patterns and is popular in aerospace, military, civil engineering, motorsports, and other competition sports due to its low weight, high tensile strength, and low thermal expansion. However, carbon fiber is relatively expensive compared to similar materials such as fiberglass or plastic.

Carbon fiber is excellent at resisting tension or stretching, but it is not as strong when compressed or exposed to high shock. In 1958, high-performance carbon fibers were first created by Roger Bacon at the Union Carbide Parma Technical Center, using rayon strands heated until they carbonized. This process was inefficient, and the resulting fibers had only about 20 percent carbon and low-strength properties. In the early 1960s, Dr. Akio Shindo of the Agency of Industrial Science and Technology of Japan created carbon fiber using polyacrylonitrile (PAN) as the raw material, resulting in a fiber containing about 55 percent carbon.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.