Chemical-Resistant Heat-Insulation 100% 3K Ultra-Thin Carbon Fiber Panels

Chemical-Resistant Heat-Insulation 100% 3K Ultra-Thin Carbon Fiber Panels

Carbon fiber Plates/Panels or composites are carbon fiber fabric infused with epoxy resins and then cured to become rigid. Sheets consist of multiple pieces of fabric and come in different sizes, thicknesses, and weaves. Sheets are flat, so they are typically useful on flat surfaces. The thicker the sheet is, the more rigid it becomes. Each type of weave has distinct properties, uses, and appearance. Some weaves are stable but less pliable. Others are elegant but not strong.

Benefits of Plates/Panels

• Lightweight: Carbon fibre is low in density, therefore extremely light. Due to its high strength to weight ratio, the carbon sheet is considered better than steel.
• Low thermal expansion: One issue with the industrial materials is that they tend to expand or contract in temperature changes, which disturbs the overall performance of the industry. The carbon fibre sheet does not do that. It expands and contracts a lot less than other materials.
• High tensile strength: When it comes to tensile strength, carbon sheet is one of the strongest amongst all other commercial fibres and sheets. Carbon sheets are difficult to bend or stretch.
• Durability: Carbon fibre sheets do not wear out as easily as any other material. That is because they have exceptional fatigue properties.
• Resistive towards corrosion: If the carbon fibre sheet is made with appropriate resin, it will be one of the most corrosion-resistant materials in the market.
• Radiolucence: Carbon fibre sheets are invisible in x rays and transparent to radiation. That’s why they have numerous medical applications.
• Electrical conductivity: They are good conductors of electricity, and this property increases their range of applications.
• Ultraviolet resistant: If proper resins are used, they will be UV resistant too.

How to Choose Plates/Panels

1. Quality: The quality of carbon fiber panels greatly affects its performance. Some low-quality carbon fiber plates may have defects during the production process, such as bubbles, cracks, interlayer peeling and other problems. These defects will lead to a decrease in the strength, hardness, wear resistance and other properties of the carbon fiber plates. When purchasing carbon fiber boards, you can initially judge the quality by observing the appearance, feel, etc. It is also recommended to choose carbon fiber boards produced by well-known brands and regular manufacturers.
2. Performance: Different carbon fiber plates have different properties, such as strength, hardness, wear resistance, impact resistance, corrosion resistance, etc. Generally speaking, the strength of carbon fiber boards is proportional to the hardness, but excessive hardness can also lead to increased brittleness and affect the impact resistance of carbon fiber boards. When choosing carbon fiber boards, you should choose appropriate performance indicators based on specific application scenarios, and don't just blindly pursue high strength and hardness.
3. Price: The price of carbon fiber boards is higher than traditional materials, but the prices of different carbon fiber boards vary greatly. Lower priced carbon fiber panels may suffer from quality and performance deficiencies, while overpriced carbon fiber panels may suffer from issues such as brand premium. When choosing carbon fiber panels, you need to comprehensively consider factors such as price, quality, performance, etc., and choose products with higher cost performance.

Single-Sided Carbon Fiber Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.