0.2-2.0mm Thickness Galvanized Steel Cut To Length And Slit Machine

0.2-2.0mm Thickness Galvanized Steel Cut To Length And Slit Machine

A "cut to length and slit machine" is a specialized piece of equipment used in metal processing and manufacturing industries. It performs two primary functions:

1. Cut to Length (CTL):

   • Function: The machine cuts a continuous metal coil into individual sheets or strips of a specific length.
   • Process: The metal coil is fed into the machine, and based on pre-set parameters (input by the operator or controlled by a computerized system), it accurately cuts the coil into sheets or strips of desired lengths. This is particularly useful for creating metal sheets or strips that are ready for further processing or for direct use in fabrication.

2. Slitting:

   • Function: The machine also slits the metal coil into narrower strips of specified widths.
   • Process: After the metal coil is fed into the machine, it passes through multiple slitting blades or circular knives that cut the coil longitudinally into narrower strips. This process allows manufacturers to produce multiple narrower coils or strips from a single wider coil. Slitting is commonly used to create coils or strips of different widths that meet specific customer requirements or to optimize material usage in subsequent manufacturing processes.

Parameters

1. Material of processible coiled plate: Galvanized steel, Carbon steel and Aluminium coils
2. Thickness of coiled plate: 0.2-2.0mm;
3. Width of coiled plate: 1250mm;
4. Line speed: 0-10m/min ;
5. Loading capacity:5T hydraulic;
6. Coil I.D: ф480-510mm;
7. Coil O.D: ≤ф1400mm;
8. Diameter of leveling rollers: ф60
9. The distance between leveling rollers: 65mm
10. Material of leveling rollers:40Cr, hardness:HRC52-60
11. Power: 440V three-phase electricity 60Hz;
12. Tolerance of diagonal error:≤±2mm/2000mm
13. Tolerance of length error: ≤±2mm/2000mm
14. Leveling rolls: 4 up, and 5 down
15. Cutting device height is the same as the double machine portable table height.
16. The electrical box is cantilever one unit, it can connect the electrical control box both side of the machine
17. The hydraulic station is within the main machine together, so forklift can move easily.

Hydraulic Control System

Ensure the using of hydraulic parts

The working pressure of the hydraulic system is 6.3-16Mpa

Hydraulic tank capacity is 80 liters

Electrical control system: Siemens PLC and touch screen

PLC control mode, It is controlled by touch screen.

Spare Parts

Machine Shows

The main products of factory is light gauge framing machine, pre-painted steel forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down Pipe forming machine, The whole carriage plate for car beam unit , Steel storage unit, etc. Totally it has 100 types in 20 serious. The products are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas, residential, greenhouse and other construction projects. Our factory can meet the construction enterprises, automobile industry, iron and steel production enterprises’s growing demand.