19mm Diameter Silicon Diaphragm Pressure Sensor 316L Piezoresistive Pressure Sensor

HT19 Piezoresistive Silicon Pressure Sensor

Introduction of 15mm silicon pressure sensor:

HT19 piezoresistive silicon pressure sensor, the main component is high stability diffuse reflection silicon sensing element. The sensing package utilizes silicone oil to transfer pressure from a 316L stainless steel diaphragm to the sensing element. The piezoresistive effect method of diffused silicon was used to measure the gas and liquid pressure. It is the most commonly used diffused silicon sensor to measure pressure, and the price is cheaper than other types.

Electrical performance of 15mm silicon pressure sensor:

• Supply:1.5mADC
• Input impedance:3KΩ~6KΩ
• Output impedance:2.5KΩ~6KΩ
• Insulation resistance:≥100MΩ/50VDC
• Insulation voltage:500VAC between the housing and electrical connection will not cause damage
• Medium compatible: liquid, gas compatible with 316L stainless steel

Performance Specification of silicon Pressure sensor

Note :Above parameter under condition:Supply: 1.5mA Temperature: 25℃

Dimension

1. Pay attention to the fit between the core size and the transmitter housing during assembly to achieve the required air tightness

2. During the assembly of the housing, ensure it is aligned vertically and apply even pressure to avoid jamming or damaging the compensation plate.

3. If the measured medium is not compatible with the core diaphragm and the housing material (316L), special instructions should be provided when placing the order.

4. Avoid pressing the sensor diaphragm with hands or sharp objects to prevent damage to the core due to diaphragm deformation or piercing.

5. Keep the pressure port of the gauge pressure core open to the atmosphere and prevent the entry of water, water vapor, or corrosive media into the core negative pressure chamber.

6. If there are any changes to the pin leads, follow the label on the actual core for reference.

   Baoji Hengtong Electronics Co., Ltd., located in the renowned "The Western Sensor Capital of China" - Baoji city, was established in 1994. As a leading domestic manufacturer of pressure sensors and pressure transmitter, the company has been dedicated to the production of pressure sensors for nearly 30 years. It is also one of the earliest high-tech enterprises in China that integrates research, production, and sales of pressure sensors. With a factory area of over 7,000 square meters, the company has more than 150 employees and an annual production capacity of 300,000 pressure sensors. It has sales teams in various cities such as Xi'an, Beijing, and Guangzhou, and its products are exported to more than 50 countries and regions.

   Adhering to the development philosophy of "guided by technological innovation," the company is committed to researching and developing advanced and high-quality pressure sensor products to meet the ever-changing market demands. Additionally, the company upholds the business principle of "meticulous customization, creating infinite value," by thoroughly understanding the needs of each customer. Through meticulous customized services and products, the company aims to create boundless value and establish long-lasting cooperative relationships with its customers.