Customized Dry Mix Shotcrete Machine 200M Transport Distance

Customized Dry Type Shotcrete Equipment Easy Operation User Friendly

Shotcrete Equipment

Prepare for startup Shotcrete Equipment:
Operate the machine for a short time in order to grasp the rotation situation (pay attention to whether the direction of operation is the same as the direction of arrow, pay attention to avoid the heating of friction plate). Check the pressure applied to the sealing plate. First, it is used to lock the nut on the clamping device rod until it is pressed. Then, it is used to tighten 2-3 rings with a wrench until the sealing plate does not leak air.

Parameters of Shotcrete Equipment:

Operation Method of Shotcrete Equipment:
After the preparation work is finished, the mixing material can be added to the machine. The machine operator should first open the main valve, the valve of the upper air duct opens 1/3 circles, and then adjust the air pressure of the lower air duct (to the cyclone) to about 0.05-0.1 MPa (depending on the delivery distance). Then the sprayer opens the nozzle valve and gives the wet rock surface. At this time, the operator can start the machine and start shotcreting. Now the working pressure is about 0.2-0.4 MPa. According to the water-cement ratio of mixtures and the length of conveying distance, after adjusting and determining the wind pressure to the cyclone, the upper air pipe valve is opened again until there is no more material leakage at the machine outlet.

Henan Tytion Machinery Co., Ltd is a joint venture enterprise which is mainly offer construction support machine, such as: cement grout pump; high pressure grouting pump; mortar grout pump; hydraulic grouting pump (for two liquid grouting); dry mix shotcrete machine; wet shotcrete machine; concrete pump; tunnel machine; and environment friendly equipment: scrap shear machine and hydraulic baling machine.