Electric 200M Dry Mix Shotcrete Machine Portable Gunite Machine

Energy Conservation Tunnel Used Dry Shotcrete Machine Advanced Technology

Dry Shotcrete Machine

Driving Device of Dry Shotcrete Machine:
The fully enclosed oil-immersed reducer is mounted at the bottom of the machine and is driven by three gears. The total transmission ratio is about 87, and the transmission efficiency is 92%. The motor is mounted vertically on the reducer, parallel to the rotor shaft.

Parameters of Dry Shotcrete Machine:

Operation Method of Dry Shotcrete Machine:
After the preparation work is finished, the mixing material can be added to the machine. The machine operator should first open the main valve, the valve of the upper air duct opens 1/3 circles, and then adjust the air pressure of the lower air duct (to the cyclone) to about 0.05-0.1 MPa (depending on the delivery distance). Then the sprayer opens the nozzle valve and gives the wet rock surface. At this time, the operator can start the machine and start shotcreting. Now the working pressure is about 0.2-0.4 MPa. According to the water-cement ratio of mixtures and the length of conveying distance, after adjusting and determining the wind pressure to the cyclone, the upper air pipe valve is opened again until there is no more material leakage at the machine outlet.

Henan Tytion Machinery Co., Ltd is a joint venture enterprise which is mainly offer construction support machine, such as: cement grout pump; high pressure grouting pump; mortar grout pump; hydraulic grouting pump (for two liquid grouting); dry mix shotcrete machine; wet shotcrete machine; concrete pump; tunnel machine; and environment friendly equipment: scrap shear machine and hydraulic baling machine.