Customized Carbon Fiber Sheet Plate Heat Resistant 400MM*400MM 0.3mm

Customized Carbon Fiber Products Heat Resistant Carbon Fiber Sheet

Custom Made High Tensile Rolling Process 3K Twill Weave Full Carbon Fiber Cloth. The Carbon Fibers we use contain high strength-to-weight and stiffness-to-weight ratios, carbon fabrics are thermally and electrically conductive and exhibit excellent fatigue resistance. When properly engineered, carbon fabric composites can achieve the strength and stiffness of metals at significant weight savings. Carbon Fabrics are compatible with various resin systems in clouding epoxy, polyester, and vinyl ester resins.

3K Twill carbon fiber sheet, one construction part with lightweight, high density, high strength, and high modulus. It saves lots of mold costs once take them as solid parts in the structure. And CNC machining kinds of products you expect. Such as drone architecture, Powered toy cars, medical, industry, and so on.

Advantages of Carbon Fiber

Carbon fiber composites stand out from the crowd for several reasons. Here are a few:

• Lightweight – It is a low-density material with a very high strength-to-weight ratio
• High tensile strength – One of the strongest of all commercial reinforcing fibers when it comes to tension, carbon fiber is very difficult to stretch or bend as it has the ultimate tensile strength
• Low thermal expansion – It will expand or contract much less in hot or cold conditions than materials like steel and aluminum
• Exceptional durability – Carbon fiber has superior fatigue properties compared to metal, meaning components made of it won’t wear out as quickly under the stress of constant use
• Corrosion-resistance – When made with the appropriate resins, it is one of the most corrosion-resistant materials available
• Radiolucence – Carbon fiber is transparent to radiation and invisible in x-rays, making it valuable for usage in medical equipment and facilities
• Electrical conductivity – Carbon fiber composites are excellent conductors of electricity
• Ultra-violet resistant – Carbon fiber can be UV resistant with the use of the proper resin

Features:

• Made of Carbon Fiber material
• Very Strong and Light
• Smooth finish
• High Tensile Strength
• Excellent quality
• Resistance to ultraviolet light.
• Anti-aging and corrosion resistance.

Physical Parameter:

Single-Sided Carbon Fiber Plate Specification:

FAQ:

1. Are you a factory or a trader?

We are a factory, with more than 16 years experience in composite products. We are one of the top manufacturers of carbon fiber tubes in China.

2. Can you send us a sample to check?

Yes, we can send you a free sample to check. You can pay the freight costs. When you place an order, we will return the freight cost to you.

3. What about the terms of payment?

T/T, L/C, Western union, etc

4. When can I get the quotation?

We usually quote within 24 hours after we get your inquiry.

5. What’s the difference between Chengcheng and other factories?

We have our own technology and research team. Our products strictly follow the quality control system in the composite products field.

6. Do you provide OEM service

Yes. OEM is welcome. We can make molds according to customers’ drawings and samples

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.