Medical Equipment Aluminum Circuit Board 10 Layer ISO 14001 Qualified

10 Layer Printed Circuit Board ISO 14001 Qualified Used In Medical Equipment

Main Features:

1 10 Layer customized printed circuit board manufacturered based on customer's gerber files.

2 Used in Motor areas.

3 Material is FR4 S1000-2 TG170.

4 The finished board thickness is 2.0MM.

5 The finished copper thickness is 35UM.

6 Surface treatment is ENIG 2U'.

7 Drilling: L1-L5 0.2MM, L6-L10 0.2MM, L1-L10 0.2MM

8 Lead time is around 20 working days.

Material Data Sheet:

FQA:

Q1: What is a PCB Test Coupon?

A1: During the PCB Manufacturing process, it is important to evaluate the quality of the boards being fabricated. A good way to do this is to fabricate a few extra boards called PCB Test Coupons which can be tested to evaluate the performance of the boards. PCB Test Coupons are designed to have the same spec (trace width, copper weight, via structure, etc.) as the original PCB board and are tested to identify manufacturing defects, material defects or other related defects.

During the PCB Fabrication process multiple PCBs are fabricated on a large board called a panel. The PCB Test Coupon is usually not a part of the core PCB panel, is built in section surrounding the PCBs. They are designed to represent actual board conditions for plating, etching and lamination. It's common to fabricate one coupon at each end of a board panel to verify performance across the entire panel. Any defect identified in the PCB Test Coupon would mean that other boards on the same panel would have the same issues.

Advantages of using PCB Test Coupon:

• There is always a coupon which can be analyzed without the need to cut samples from any of the PCBs in a batch.
• Coupons are the best way to measure and characterize the real-life PCB conditions.
• They can be standardized using fixtures to speed up the testing process.
• Apt for destructive testing, say demanding testing without damaging the desired PCB.
• Monitoring of the production and assembly processes becomes easier, hence increases the production yields.

Witgain Technology Limited was established in 2007. Factories locate in HuiZhou City and marketing locates in ShenZhen City. The total area of two factories is around 10000 square meters. We can offer 2-layer and multi-layer pcb services to our customers, highest to 24 layers and rigid-flex pcb, ceramic pcb, HDI pcb, heavy copper pcb are also included. To meet our customer's diversified demands, we also accept prototype orders, small batch orders and big batch orders. Quality and technology is what we value most and we will never stop improving our capabilities. Our customers' satisfaction is always what we are seeking for.