1-3mm PA6 Fishing Line Monofilament Extrusion Machine Industrial Filament Extruder

1. Extruder: 1 set

(1) Screw diameter: 90mm, Rotation speed of screw: 0～80 rpm. Screw: Zhoushan.

(2) L:D: 30:1, Material of screw: 38CrMoALA , The screw is suitable for PA6 chips.

(3) Pressure automatic feedback system which can adjust the screw speed automatically.

(4) Metering pump, rotation speed: 0-45 rpm.

(5) Electrical heating spinneret: 1 set.

3. Quenching tank: 1 set

(1) The tank is made by SS 304.

(2) Equip one suction device under the yarn support plate.

4. Seven roller stretching unit A

(1) Seven variable diameter rollers made by steel pipe with hard chrome plating.

(2) Steel box with accurately grind gear makes the rollers run smoothly.

(3) Built-out oil lubrication system which makes the gears runs steady.

5. Overflow water tank: 1 set

(1) Tank size: 4000mm

(2) Electric heating pipe is in the tank.

(3) The tank is made by SS 304 with insulating layer.

(4) Water removal device: 2 sets with suction.

6. Seven roller stretching unit B

(1) Seven variable diameter rollers made by steel pipe.

(2) Steel structure box with accurately grind gear makes the rollers run smoothly.

(3) Built-in oil lubrication system which makes the gears runs steady. Bearings: TIMKEN-TWB.

7. Double layers hot blast stretching oven: 1 set

(1) Oven length: 4300 mm

(2) Heating power 23kw×2

8. Seven roller stretching unit C

(1) Seven variable diameter rollers made by steel pipe with hard chrome plating.

(2) Steel structure box with accurately grind gear makes the rollers run smoothly.

(3) Built-in oil lubrication system which makes the gears runs steady.

9. Double layers hot blast stretching oven: 2 sets

(1) Oven length: 4000 mm

(2) Heating power 23kw×2

10. Seven roller stretching unit D.

(1) Seven variable diameter rollers made by steel pipe with hard chrome plating.

(2) Steel structure box with accurately grind gear makes the rollers run smoothly.

11. Lubricating system: 1 set

(1) Frequency control of speed

(2) Material: All made by SS 304

12. Spindle winder: 24 spindles

(1) Spool as client's request.

(2) The frame transmission is frequency control, driving motor: 2.2kw

(3) The tension controlled by inverter.

13. Waster yarn collectors: 1 set

Specification:

Picture: