| Sign In | Join Free | My frbiz.com |
|
| Sign In | Join Free | My frbiz.com |
|
| Categories | Electrical Appliance Testing Equipment |
|---|---|
| Brand Name: | Sinuo |
| Model Number: | SN2206 |
| Certification: | Calibration Certificate (Cost Additional) |
| Place of Origin: | China |
| MOQ: | 1 |
| Price: | Negotiable |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 30 Sets Per Month |
| Delivery Time: | 30 Days |
| Packaging Details: | Standard Exporting Boxed |
| Standard: | IEC62262 |
| Energy / J: | 2, 5, 10, 20 and 50J are optional |
| Conduit: | Each striking element is equipped with a dedicated conduit |
| Impact Point: | The device has X and Y axis guides to move the release device over the entire bottom area |
| Height of Impact Point: | 0-1000mm, electric adjustable |
| Height of Fall: | Please refer to table 2, fixed by the conduit |
| Company Info. |
| Sinuo Testing Equipment Co. , Limited |
| Verified Supplier |
| View Contact Details |
| Product List |
IEC62262 IK07-IK10 Mechanical Vertical Impact Test Apparatus
Product Introduction:
The IK07-IK10 Mechanical Vertical Impact Test Apparatus is designed and manufactured according to the standard requirements of IEC60068-2-75, IEC60598-1, IEC62262 and etc.
It is used for the impact resistance test of the enclosures of
household and similar electronic and electrical products and their
accessories, luminaires, etc., to assess the safety performance and
strength level of the products.
The principle is that the striking element is free released at a
certain height through a 1 m pendulum tube, impact the specimen at
the lowest point in the vertical direction, after the conversion of
gravitational potential energy to kinetic energy, to achieve the
purpose of impact test on the sample.
Technical Parameters:
| Standard | IEC62262 |
| Energy / J | 2, 5, 10, 20 and 50J are optional |
Striking Elements (Equivalent Mass) | 500g,1.7kg,5 kg,5 kg,10 kg, please refer to the following table 1 |
| Conduit | Each striking element is equipped with a dedicated conduit |
| Impact Point | The device has X and Y axis guides to move the release device over the entire bottom area |
| Height of Impact Point | 0-1000mm, electric adjustable |
| Height of Fall | Please refer to table 2, fixed by the conduit |
| Release Method | Electromagnet release |
| Bottom Plate | Nylon base plate thickness 8mm, hardness HRR85-100,1000m×1000m |
Relationship of IK code and corresponding energy :
IK Code | IK07 | IK08 | IK09 | IK10 | ||||
| Energy / J | 2 | 5 | 10 | 20 | ||||
Note 1. If higher impact energy is required, the recommended value is 50J. Note 2: Some other standards use a single digit to indicate the specified impact energy. To avoid mixing with it, the feature number is represented by two digits. | ||||||||
an unprotected according to this standard | ||||||||
|
PLC Control Electrical Appliance Testing Equipment Cordless Kettle Abnormal Operation Stress Withstand Safety Test
IEC60335-2-24 Single Station Refrigerator Freezer Door Open Endurance and Pull Testing Machine
16 Channels Temperature Measurement and Recording Instrument 1000 ℃ Temperature Recorder
Black Plywood Test Corner Electrical Appliance Testing Equipment Temperature Rise Heating Test
Single Station Electrical Appliance Testing Equipment Insulation Surface Scratch Resistance Test IEC60335-1
Aluminum Vessels and Low Carbon Steel Vessels Φ110mm Φ145mm Φ180mm Φ220mm Φ300mm
IEC 60335-1 Electrical Appliance Testing Equipment 12.5kV 1.2/50μS Or 7kV 10/700μS Impulse Voltages Generator
IEC 60068-2-75 Single or Multiple Energy Stainless Steel Spring Hammer Test Apparatus
IEC 60068-2-75 Test Eha 2J 5J 10J 20J Striking Element Electromagnet Release Impact Test Apparatus
IEC 61032 Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification
