ISO Automotive 25 Ton 210mm Height Air Hydraulic Jack

Exporting quality 50 ton air hydraulic bottle jack by ISO

,

Lifting:

1. Connect adequate air source to the air supply inlet(Air pressure 0.9-1.2Mpa)

2. Turn the control valve clockwise until the pump starts.

3. Transfer the load immediately to appropriately rated jack stands.

Lowering:

1. Raise load high enough to clear the jack stands.

2. Remove jack stands carefully(always used in pairs).

3. Slowly turn handle knob counter-clockwise, if the load fails to lower:
(a). Use another jack to raise the vehicle high enough to reinstall jack stands.

(b). Remove the malfunction jack and then jack stands.

(c).Use the functioning jack to lower the vehicle.

4. After removing jack from under the vehicle, fully retract the jack to reduce ram exposure to rust and contamination.

The detailed compenent parts: