Electronic Ignition Condensing Steam Boiler Low Consumption Energy Saving Integrated Design

Product Discription

WNS Condensing Steam Boiler

The production model is WNS. This is a horizontal internal combustion of three -way fuel (gas) a fast -charged integrated boiler with a wet rear design. The wool tank and ignition chamber are the first, the second is a gas pipe and the third is composed of an economist and capacitor.

This product is used for burning light oil, natural gas and so on. The fuel is fired from the burner, ignited by an electronic ignition rod, and burned under mildly positive furnace pressure. High smoke temperature after combustion enters the coil pipe through reflux chambers in 180 degrees, and enters the front smoke pipe.

Product Features

1. Reasonable design:

Horizontal internal combustion murder in three cycles, wet tail structure, 100% fire water design, 100% wave bladder, has good expansion, sufficient heat interval and reasonable structure.

2. High efficiency and energy saving:

The structure of the blast furnace, threaded pipes and large combustion chamber is reasonable, energy consumption is low and the efficiency of heat transfer is high.The thermal efficiency of boilers can exceed 96%, and if capacitors are installed, the efficiency can be super is 100%.

3. Manufacturing specifications:

Boiler components are manufactured according to national and international standards (ISO). Advanced production technologies are closely monitored at every stage of production to ensure product quality.

4. Large steam room:

Since steam drying helps to eliminate superfluous condensation, reduce fuel consumption, scale and prolong service life, coke has enough space to manage the fluctuations of load and peak value, and to provide steam for high qu drying Italy.

5. Duration and duration:

Excellent professional design, advanced production technology and rigorous quality control guarantee the quality of all boilers in the regions of Henan and Hebei.

6. Easy to maintain:

There is a portable front and back smoke door, and a back control hole for the control and cleaning of the oven. There are maintenance holes, mechanical holes and manual holes in the body, and the latter is fully considered in the drawing.

Technical Parameters

Note: the fuel consumption in the table is based on light oil low calorific value 42915KJ/Kg (10260Kcal/Kg), natural gas low calorific value 35588KJ/NM3 (8500Kcal/NM3) and liquefied gas low calorific value 45998KJ/Kg (11000Kcal/Kg). Calculation of low calorific value (16750KJ/NM3 (4000Kcal/NM3) of urban gas.

Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.

     It is one of the ten most famous towns in Zhongzhou, which is adjacent to National Highway 107 in the South and Beijing-Guangzhou Railway in the north. The company has the B-class boiler manufacturing license issued by the General Administration of Inspection and Quarantine of the State Quality Supervision Bureau and the D1 and D2-class pressure vessel manufacturing license. It is a comprehensive manufacturer of steam boilers, hot water boilers, heat carrier boilers, pressure vessels of Class I and II and auxiliary machines for various boilers. The company was founded in 1987.

     After relocation and expansion, it now has perfect production equipment and testing means, a high-quality staff and technical team, and has established and improved a set of quality assurance system. The quality policy of "quality-oriented, safety first, energy-saving, environmental protection, refinement" and "the pass rate of main parts inspection is over 95%, the pass rate of welding seam inspection is over 98%, the pass rate of product inspection is 100%, the pass rate of products manufactured is 100%, and the implementation rate of regulations and standards is 100%" have been formulated.

Product quality is safe and reliable, environmental protection and energy saving, and conforms to the national standards and industry standards. Pressure vessel products are inspected by the quality and technical supervision department and issued with product inspection certificate. 

Xinxiang Xinguo Container Manufacturing Co., Ltd. is willing to cooperate sincerely with friends from all walks of life to create brilliance!