Packaged Gas Fired Condensing Boiler 1.0-1.25Mpa Working Pressure Optimized Design

Product Discription

WNS Condensing Steam Boiler

The product model is WNS. It is an internal horizontal combustion of three -way fuel (gas) of fast charging Caldeira integrated with wet rear structure. The Onda tank and the ignition chamber are the first time, the second time is the combustion gas tube, and the third time is composed of econom Laser and capacitor.

This Product is used to burn light oil, natural gas and so on. The fuel is ejected from the burner, ignited by an electronic ignition rod, and burned under a slightly positive pressure in the oven. High temperature smoke after burning enters the threaded smoke pipe through the 180 -degree reflux chamber, and enters the smoke box from the front through the smoke tube.

Product Features

1. Reasonable design:

Horizontal internal combustion From three complete cycles of wet tail structure, 100% Fire water design, 100% Onda furnace, TEM good expansibility, sufficient heat range and reasonable structure layout.

2. High efficiency and energy savings:

The structure of the blast furnace, threaded combustion tube and large combustion chamber is reasonable, Energy consumption is low and the efficiency of heat transfer is high. The thermal efficiency of the boilers may exceed 96%, and if the condensers are installed, efficiency It may exceed 100%.

3. Production specifications:

Caldeira components are manufactured according to national and international standards (ISO). Advanced production technologies are followed closely in the production phase to ensure product quality.

4. Big steam chamber.

As vapour drying helps eliminate unnecessary additional condensation, reduce fuel consumption, scale and prolonged service life, the coke has sufficient space to cope with fluctuations in load and maximum value, and to provide steam for high quality drying.

5. Duration and durability:

Excellent professional design, advanced production technology and strict quality control guarantee the quality of all the boilers in the Henan and Hebei regions.

6. Easy to Keep:

There is a portable smoke door in front and behind, and a control hole in the back to control and clean the furnace.There are maintenance holes, mechanical holes and hand holes in the body, and the latter is fully considered in the design.

Technical Parameters

Note: the fuel consumption in the table is based on light oil low calorific value 42915KJ/Kg (10260Kcal/Kg), natural gas low calorific value 35588KJ/NM3 (8500Kcal/NM3) and liquefied gas low calorific value 45998KJ/Kg (11000Kcal/Kg). Calculation of low calorific value (16750KJ/NM3 (4000Kcal/NM3) of urban gas.

Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.

     It is one of the ten most famous towns in Zhongzhou, which is adjacent to National Highway 107 in the South and Beijing-Guangzhou Railway in the north. The company has the B-class boiler manufacturing license issued by the General Administration of Inspection and Quarantine of the State Quality Supervision Bureau and the D1 and D2-class pressure vessel manufacturing license. It is a comprehensive manufacturer of steam boilers, hot water boilers, heat carrier boilers, pressure vessels of Class I and II and auxiliary machines for various boilers. The company was founded in 1987.

     After relocation and expansion, it now has perfect production equipment and testing means, a high-quality staff and technical team, and has established and improved a set of quality assurance system. The quality policy of "quality-oriented, safety first, energy-saving, environmental protection, refinement" and "the pass rate of main parts inspection is over 95%, the pass rate of welding seam inspection is over 98%, the pass rate of product inspection is 100%, the pass rate of products manufactured is 100%, and the implementation rate of regulations and standards is 100%" have been formulated.

Product quality is safe and reliable, environmental protection and energy saving, and conforms to the national standards and industry standards. Pressure vessel products are inspected by the quality and technical supervision department and issued with product inspection certificate. 

Xinxiang Xinguo Container Manufacturing Co., Ltd. is willing to cooperate sincerely with friends from all walks of life to create brilliance!