Screwing Type Fiber Optic Splice Closure Mechanical Sealing 4 Ports

FA-FSC-V2, Dome Type Fiber Optic Splice Closure Mechanical Sealing 4 Ports Max 96 Cores

During winding fiber, note the distortion direction of the optical fiber, generally is should be fallen "8" type, do not wring the fiber and avoid damage during covering and package. The fiber optic splice closure must be operated strictly according to the instruction and procedures, otherwise it may cause heavy losses. And must pay attention to the operation procedure of the splicing machine, and the length of the heat shrinkable tube shall be consistent with the requirements. After the fiber is spliced, the fiber should be protected by the heat shrinkable tube and the remaining fiber should be winded. During the process of winding fiber, the bending radius of the fiber can not be too small, generally not less than 40mm. If the bending radius is too small, it is easy to cause big refraction loss and increases dispersion. For a long time, the fiber may be broken. Specific operation requirements:

Wind 1.5 cycles of the optical fiber in the fiber tray, and then wind all the remaining fibers in the fiber splice joint closure.

2, Use single core buffer tube for single core fiber, and use ribbon buffer tube for ribbon fiber . Use nylon tie to tight the buffer at the inlet of the fiber splice closure.

3, Match two fibers or two fiber band according to the provisions and put the connection into the slot of the fiber tray, and wind the extra fiber in the fiber cassette.

Cover the upper plate and press it in place.

5, Use correct fiber tray according to the needs of different capacity, decided added number pf fiber cassette, the superposition type of fiber tray must conform to the slots unit for fiber connection and meet requirements of checking and maintenance .

Main Components Of FA-FSC-V2

Main Accessories And Special Tools

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.