Aerial Fiber Optic Splice Closure For Ribbon Optical Cable Maximum 288 Cores

FA-FSC-HO4, Aerial Fiber Optic Splice Closure For Ribbon Optical Cable Maximum 288 Cores

Sealing of fiber splice joint closure is very important in the actual project. Because the fiber surface is easy to produce micro cracks if there is water or moisture in the splice closure and the fiber will break for a long time, and the fiber splicing closure is directly buried underground mostly, so excellent sealing is necessary for the fiber splice joint closure.As for horizontal type, The sealing of fiber cable joint closure is mainly included two parts: the sealing between the optical cable and the closure,sealing between the upper and lower cover plates. Before sealing, it need to polish the cable outer sheath on the vertical axial with gauze, so that the cable and the sealing tape can be closer together and the sealing can be done better. The sealing between the upper and lower cover plates should pay attention to the sealing tape, it need to place evenly in the sealing groove and the screw should be tightly screwed without gap.

Technical parameters of fiber optic splice closure:

1, Aging resistance: have good stability on heat, heat radiation, air, ozone and so on.

2, Corrosion resistance: with strong resistance to dilute acids, salts, oxidants, aliphatic hydrocarbons, etc..

3, Sealing technology: use seal components which can be open repeatedly to ensure good airtight and waterproof performance.

4, Mechanical performance: able to endure harsh conditions such as vibration, impact, fiber tension, distortion and strong temperature changes.

5, Locking device: no special tools, easy for installation and repeated opening.

6, Divergence function: provide various options like 2 inlet 2 outlet, 3 input 3 output, 4 inlet 4 outlet.

7, Splicing function: using stacked clamshell structure,does not need to remove other fiber cassette during operation.

8, Other performance requirements are compliant with YD/T814.1-2004 standard.

Main Components Of FA-FSC-HO4

Main Accessories And Special Tools

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.