Car Sticker Protective Film 76%VTL 99%UR 94%IR Nano Ceramic Car Body Wrap Film

Technical Specifications

Feature Details

Material Multi-layer nano-ceramic particles + PVC base

Thickness 2.0 Mil

Heat Rejection 94% IR rejection

UV Protection 99% UV

VLT (%) 76%

Warranty Lifetime against bubbling, peeling, and discoloration

Installation DIY-friendly (static cling) or professional-grade adhesive options

Product Features

✔ 76% VLT – Nearly invisible protection with high clarity.

✔ 99% UV Rejection – Prevents paint fading and interior damage.

✔ 94% IR Rejection – Reduces heat buildup for a cooler cabin.

✔ Nano-Ceramic Coating – Enhances scratch resistance and durability.

✔ Self-Healing Properties – Minor scratches disappear with heat.

✔ Hydrophobic & Oleophobic – Repels water, dirt, and oil for easy cleaning.

✔ Glossy Finish – Maintains the original shine of your car’s paint.

✔ Tear-Resistant & Flexible – Easy installation on complex curves.

Installation

Surface Preparation

1. Ensure surfaces are dry, smooth, and free of scratches, Use clean microfiber cloths to avoid lint or dust. Wipe thoroughiy to prevent rust spots.
2.Replace edge films for larger panels if necessary

Squeegee Selection
1. Use a hard plastic-edged squeegee wrapped with soft felt or a soft-tip squeegee.

2. pray soapy vater on the film adhesive to reduce friction, minimize bubbles, and avoid damaging the self-healing layer.

Bubble Removal
1. Work from the center outward with the squeegee to remove air bubbles.

2. Avoid leaving gaps, as trapped air may cause adhesive marks. Use a mist of water and soap for large surfaces ike ahood if you have difficulty to instal

Front/Rear Bumper Installation
1. Two technicians are requiredt one to stretch horizontally, the other to secure vertically.
2. Ensure the fim does not exceed 1.5x the original bumper length to prevent peeling or overheating (risk of "bursting”).

Narrow Areas (A-Pillars)
1. Select appropriately sized film for narrow sections.
2.Avoic overlapping seams to prevent adhesive marks.

Edge Trimming

1. Trim edges neatly, Use a heat gun to soften the film, then press edges into seams with a hard plastic roller

2. Heat edges thoroughly with the heat gun and apply firm pressure to seal.

Why Choose Ceramic Tint Over Other Films?

No signal interference (unlike metallic tints).

Better heat rejection than dyed or carbon films.

No purple fading (common in cheap dyed films).

Sleek, professional appearance with no reflective glare.

Installation Guide

Clean the glass thoroughly (remove dust, grease, and old tint residue).

Cut the film to size (leave a small margin for trimming).

Apply soapy water to the glass for easy positioning.

Squeegee out air bubbles from the center outward.

Trim edges for a perfect fit. Let it cure for 2-3 days (avoid rolling down windows during this period).

Packaging & Ordering Options

Standard Packaging:

1.52m x 30m rolls

Custom sizes available

Shipping:

7-15 days delivery worldwide

KOOFILM, as the most advanced manufacturer of printing materials in China, founded in 2006, with a history of 19 years till 2024.With sixteen years of continuous innovation, breakthroughs in technical barriers and improvement of services, the company continues to expand in the field of new materials such as automotive functional films, paint protection films, car window films and multi layer optical and electronic functional films. KOOFILM has grown into a leading high-tech enterprise integrating R&D,sales, supply chain and complete after-sales service. Our aim is to put every cent of focus into products, quality is the life of an enterprise, and service is the source of customers . Now we serve customers in Southeast Asia, South Africa, Eastern Europe and the Americas, and go to the world with stable quality products and high-quality and reliable services.