3K Carbon Fiber Sheet Panels Strong Lightweight & Corrosion-Resistant

3K Carbon Fiber Sheet Panels – Strong, Lightweight & Corrosion-Resistant

A carbon fiber plate is a thick and rigid piece of composite material, made from multiple layers of carbon fiber fabric and resin. CF plates are often used in aerospace, motorsports, and construction applications due to their high strength-to-weight ratio.

Carbon fiber composite sheets are produced by the compression molding method as well as vacuum infusion using carbon fiber fabric with epoxy resin, carbon fiber prepreg.

In the process of compression molding, carbon fiber prepreg is placed into the mold, and now the prepreg gets heated under pressure in the mold with large hydraulic presses. The sheet gets cured as per the curing cycle in varying dimensions.

The Vacuum Infusion method uses vacuum pressure to inject resin into a laminate. Dry carbon fiber layers are laid into the mold, and the vacuum is applied before resin is infused. Once a complete vacuum is achieved, resin is sucked into the carbon fiber layers.

We deliver uncompromising quality and craftsmanship. Our carbon fiber sheets are consistent in quality with a superior glossy surface finish. Sheets are available in various thicknesses. Depending on the application, the sheet stiffness can be engineered using different carbon fiber layups.

Key Features

• Exceptionally rigid
• Stable dimension and UV resistant
• High Corrosion Resistance
• High Thermal Conductivity in some forms
• Low coefficient of thermal expansion
• Ideal building material for frames, trusses, and for use as reinforcing material
• High Tensile Strength: The tensile strength of carbon fiber is 6 to 12 times that of steel, reaching over 3000 MPa
• Low Density, Lightweight: The density of carbon fiber is less than one-fourth that of steel
• Corrosion Resistance: Carbon fiber tubes have very good chemical stability. In the face of corrosive environments, it still maintains very good stability
• Thermal stability: Carbon fiber can maintain a low coefficient of linear expansion even when there is a temperature difference, and will not creep easily, which can better ensure tube accuracy
• Widely used in the aerospace industry, the Bicycle industry, the sports industry, UAV, the Auto industry, etc.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.