Product Description
Color coated coil is hot galvanized plate, hot galvanized aluminum
zinc plate, galvanized plate and other substrates, after surface
pretreatment, on the surface coated with a layer or several layers
of organic coating, and then after baking curing products .
In addition to the zinc layer protection, the organic coating on
the zinc layer plays a role in covering and protecting the steel
coil from rust. The service life of the steel coil is longer than
that of the galvanized coil, about 1.5 times.
Color coated coil has characteristics with light weight, beautiful
appearance and good corrosion resistance, can be directly
processed, and different patterns and colors can be customized according to
customer's needs and requirements, we are sure that you can always
select one type that meet you best.| Location | category | value |
| Executive standard | National standard | GB/T12754-2019 |
| American Standard/European Standard | ASTM A792M |
| Cold rolled substrate | Width specification | Cold rolled substrate thickness | Including metallized layer, the thickness after painting | Label thickness |
| 1200mm | ≥0.41mm | ≥0.46mm | ≥0.45mm |
| Size deviation | Width tolerance | Upper deviation +4mm |
| Lower deviation 0 |
| thickness | Upper deviation +0.05mm |
| Lower deviation 0 |
| Yield Strength | >300MPA |
| tensile strength | 270-500MPA |
| elongation after break | More than 20% |
| Steel coil inner diameter | Standard: 508mm,Except for other agreements |
| metal coating | alloy composition | AlZnMg or galvanized AlMg |
| Total Weight of Plating Both Sides (Outside/Inside) | 150g/ (75/75 or 85/65) |
| Neutral salt spray test | The surface of the board (without passivation, anti-fingerprint and
other treatments on the surface) has a neutral salt spray test of
more than or equal to 2500 hours, and there is no red rust on the
surface. |
| When the salt spray test on the wound surface (end surface) is
greater than or equal to 1200, there is no red rust on the surface. |
| PPGI paint | PE coating structure standard (μm) | Paint structure | 2/1 | outside | ≥25 |
| Inside | ≥7 |
| pencil hardness | Not less than HB |
| Specular Gloss of Topcoat | Glossiness of finish paint mirror surface: ≥40 degrees |
| T bend value | 2T |
| Impact energy | Not less than 9J |
| Neutral salt spray test | Greater than or equal to 1500h without bubbles |
| UVB-313 | greater than or equal to 700h |
| PPGI use environment | humidity | 20% to 90% |
| temperature | Min -45°C, Max 43°C |
| unit ammonia | <30ppm |
| unit carbon dioxide | <7000ppm |
| unit oxygen | 21% |
| unit hydrogen sulfide | <5ppm |
Our Advantages
Complete range
For the use of color steel coils, we have to choose different types
of color steel coils to manufacture different PPGI. Speaking of
this, I have to briefly introduce the types of color steel coils,
which are divided into five categories. That is, home appliances,
optical materials, decorative materials, building materials, and
packaging. Among them, the production process of color steel coils
for home appliances is the most delicate and perfect.
Good performance
Zhengde color coated steel plate refers to the coating product
obtained by applying organic paint to the surface of thin steel
plate. PPGI has good anti-corrosion and decorative properties, as
well as the good formability and processing properties of organic
polymers and steel plates.
5S management
Before PPGI production, each post cleans the surrounding
environment, ground sanitation, equipment spot inspection and each
roller surface that directly affects the surface quality of the
product in the working area according to the "Workshop 5S
Management System" to ensure personal safety. At the same time,
prepare tools, auxiliary materials, raw materials, etc. within the
specified time. Ensure that the ground in the work area is free
from dust, water and oil, ensure that the equipment is in the best
condition and that the materials are used correctly.
Strictly check
PPGI image defects, surface defects, trace defects, edge defects,
gold plating defects, size defects, coating defects, uneven
defects, contamination defects, coating uneven defects, process
defects, coating surface defects, physical property defects.
Quality first: production and inspection in strict accordance with
production standards;
Price advantage: discounts based on real market prices;
Transaction security: There will be no loss of customer funds;
After-sales guarantee: the customer's problem is our problem;
Long-term cooperation: quality assurance, price advantage, sincere
service can last for a long time.Detailed Photos
Packaging & Shipping
Company Profile
Shandong Zhengde Metal Manufacturing Co., Ltd. is a production and sales company integrating hot-rolled steel
coils, cold-rolled steel coils, galvanized steel coils,
color-coated steel coils, section steel, steel pipes, steel wires,
metal mesh, stainless steel, aluminum, copper and other metal
products integrated large enterprises. Five production and sales
bases have been formed in Binzhou, Liaocheng, Wuxi, Tianjin, Jinan
and Tai'an, with more than 100 production lines, 4 nationally
recognized laboratories, 2 technical engineering centers, and 5
enterprise technology centers. Products are exported to more than
50 countries and regions such as North America, South America,
Europe, Africa, Oceania, Middle East, and Southeast Asia.
Certifications
SGCC CGCC PPGI Steel Coil Sheet Dx51d Dx52D Dx53D For Buildings Warehouses
