Good Stability 100% Carbon Fiber Sheet Laminate Plate Panel 3K Twill Matte Finish

Good Stability 100% Carbon Fiber Sheet Laminate Plate Panel 3K Twill Matte Finish

All our laminated carbon fiber sheets are produced using the heat press method. We only use high-strength carbon fiber prepregs to produce these sheets and they are available in various sizes and thicknesses.

• Standard Thickness: 0.3mm, 0.5mm, 1mm, 2mm, 3mm, 5mm, 8mm, 20mm, 50mm etc.
• Standard Size: 400x500mm, 500x500mm, 500x600, 1000x1000 mm etc
• Largest size possible: 3000mm X 8000mm
• Skin Layer: 3k carbon fabric
• Core layers:12k UD carbon fabric, Fiberglass fabric, Kevlar fabric
• Surface Weave: Plain/Twill
• Surface Finishing: Matte/Gloss

Typical uses for carbon fiber sheets include Robotics, RC models, UAVs, aerospace, motorsports, marine applications, musical instruments, etc. We also offer CNC service.

Weave Options for Carbon Fiber Sheets and Plates

LIJIN works with customers to optimize carbon fiber sheets and plates to maximize the benefits of carbon fiber composite material properties. For example, all-woven carbon fiber plates (all plain weave or twill, for example) provide excellent machinability and greater damage tolerance. Also, all-woven carbon fiber means that the weave pattern will always be present, even on edges and 3-dimensional sculpted surfaces. This type of composite is often used for the best aesthetics and design flexibility for heavily machined parts.

By incorporating uni-directional carbon fiber into the laminate, the stiffness and strength of the carbon fiber plate can be tailored to match the applied loading constraints. For example, if the component is primarily used in bending about a single axis, aligning additional uni carbon fiber in one direction will often result in a much lighter part. Likewise, if the part is primarily in torsion or has off-axis bending, then fibers can be oriented at +/- 45 degrees, which maximizes the torsional rigidity.

Surface Finish Options and Applied Designs

LIJIN offers several different surface finish options for carbon fiber sheets. These include matte/satin finish, sanded finish, and gloss. All of our finishes are applied after molding is complete. As a result, our matte and gloss finishes are much more durable than “off-the-tool” thin gloss finishes, often typical of vacuum-bagged carbon fiber sheets.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.