10L Detergent Shampoo Cosmetic Emulsifier Vacuum Mixer Homogenizer
Machine
Features of vacuum homogenizing emulsifier
1. All parts of the emulsifier in contact with the medium are made
of stainless steel 304 or 316L, which does not pollute the product.
2. The homogenizer is installed at the bottom, which can give full
play to the effect of homogenizing and mixing even in the case of
low output and low oil phase.
3. The rotor with strong balance and special curve cooperates with
the stator of the corresponding structure to achieve fluidization,
high-energy shearing, grinding and centrifugation, ensuring the
fineness of the paste.
4. The Teflon scraper can cater to the shape of the mixing tank at
any time, sweep away the sticky materials on the wall, and transfer
heat quickly.
5. The stepless speed regulation stirring component is convenient
to adjust the stirring speed at any time for stirring.
6. Equipped with stainless steel water phase dissolution tank, oil
phase dissolution tank, vacuum pump, buffer tank, control electric
box, etc.
7. Considering the particularity of some chemical processes, the
emulsifying and dispersing homogenizer can be equipped with
frequency conversion speed regulation, heating, cooling,
pressurization, decompression, vacuum and other devices to achieve
the effect of mixing and emulsification.
Specific parameter requirements of emulsifier:
10L emulsifying pot | Specific parameters |
Enclosure material/thickness | 304L/3mm |
Inner Layer Material/Thickness | 316L/3 mm |
Sandwich material/thickness | 304L/3 mm |
Matching water phase pot | |
Enclosure material/thickness | 304L/3mm |
Inner Layer Material/Thickness | 316L/3 mm |
Sandwich material/thickness | 304L/3 mm |
Matching oil phase pot | |
Enclosure material/thickness | 304L/3mm |
Inner Layer Material/Thickness | 316L/3 mm |
Sandwich material/thickness | 304L/3 mm |
Design capacity | 10L |
Working capacity | 8L |
Enclosure material/thickness | 304L/Standard |
Inner Layer Material/Thickness | 316L/Standard |
Sandwich material/thickness | 304L/Standard |
Service life | Over 10 years |
Homogenizer power | 0.55 KW |
Homogenizer speed | 2800 |
Homogenization mode | Upper homogenization |
Lid opening method | Manual or electric |
Heating method | Electric heating |
Discharge method | Inclined discharge |
Sandwich operating pressure | 0.3 MPa |
Vacuum degree in the pot | -0.09 MPa |
Overall dimensions (m) | 0.8*0.55*1.43 |
Wearing parts | 1 year spare parts. spare parts |
Warranty Period | More than 1 year |
Installation and | The supplier is responsible for commissioning |
Matching water phase pot | |
Design capacity | 5L |
Working capacity | 4L |
Enclosure material/thickness | 304L/Standard |
Inner Layer Material/Thickness | 316L/Standard |
Sandwich material/thickness | 304L/Standard |
Sandwich operating pressure | 0.3 MPa |
Lid opening method | Movable lid opening |
Heating method | Electric heating |
Discharge method | Upper suction material |
Stirring mode | Down stirring |
Stirring power | 0.025 KW |
Stirring speed | 1440r/min |
Matching oil phase pot | |
Design capacity | 5L |
Working capacity | 4L |
Enclosure material/thickness | 304L/Standard |
Inner Layer Material/Thickness | 316L/Standard |
Sandwich material/thickness | 304L/Standard |
Lid opening method | Movable lid opening |
Heating method | Electric heating |
Discharge method | Upper suction material |
Stirring mode | Upper (lower) stirring |
Stirring power | 0.025 KW |
Stirring speed | 1440r/min |
Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline
installation drawings. When the equipment needs maintenance, the
buyer shall notify the supplier in writing, and the supplier will
arrive within 2 days after receiving the notice to ensure timely
after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300
mesh, equipment size:
6. Various pipelines are required to be made of stainless steel
(316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg