Refrigerated Air Dryer Adsorption dryer

Refrigerant air dryer is one of the indispensable equipment, it eliminates all the condensed moisture of compressed air in the industrial field.

The compressed air used in the industrial field contains a lot of moisture, which will not only cause product defects, but also shorten the service life of the equipment. Therefore, it is very important to use clean and pure compressed air without water.

Refrigerant air dryer is one of the necessary equipment to remove the moisture in the compressed air condensed by the compressor in the industrial field.

INTEGRATED Refrigerated Air Dryer
HHL series compressed air refrigerated dryer armored design, simple and stylish appearance, combined with pipeline air filter, all filters are aluminum alloy
die-casting, imported filter element material, EU authority testing, ensuring high efficient filtering. Only need to be connected to the air compressor to use,
no need for cumbersome piping and save labor costs.

The refrigerated air dryer adopts aluminum alloy plate heat exchanger, environmentally friendly refrigerant and microcomputer automatic control, which can
visually display the dew point temperature of the dryer; it has multiple protections of temperature and pressure. And inside air dryer installed four pieces of
high efficiency compressed Air Filters with an electronic condensate drain, when install and maintain, it is much more convenient.


FEATURE
1. Help users save space for limited installation space.
2. The air dryer and air filter are designed in integrated way, saving time and labor costs.
3. The design of aluminum alloy three-in-one heat exchanger minimizes the process loss of cooling capacity and improves the recycling of cooling. And
under the same process capacity, the total input power will be reduced by 15-30%.
4. The integrated heat exchanger incorporates a flow-gguiding fin, which uniform heat exchange of compressed air inside; furthermore, built-in gas-water
separator will improves separation rate to protect air dryer with longer life time.
5. Multi-channel temperature and pressure control, real-time display of dew point temperature, automatic recording of accumulated running time,
self-diagnosis function, display corresponding alarm code, and automatic protection of equipment.
6. In response to the National Montreal Protocol, the series adopts R134a and R410a and R407c environmentally friendly refrigerants, which have zero
damage to the atmosphere.
7. Standard constant pressure expansion valve and intelligent temperature control, we are doing laboratory test under the intake air temperature
reaches 42ºC, the ambient temperature reaches 42ºC, the whole air dryer is still stable operation.

TECHNICAL SPECIFICATION
The following products are suitable for use at 220V 50HZ, 380V 50Hz voltage, other voltages can be customize:

Working conditions & technical requirements:
Rated ambient temperature: 38 ° C, max.42 ° C.
Rated inlet temperature: 38 ° C, max. 42 ° C.
Rated air pressure: 0.7Mpa, max. 1.0Mpa.
Pressure dew point under rated conditions: 2 ° C ~ 10 ° C (atmospheric dew point: -23 ° C ~-17 ° C).
Assembly environment: no sun, no rain, and good ventilation, installed in a horizontal hard foundation, no obvious dust and flying flour.