12km laser rangefinder module,Revolutionize Your Industrial Measurement with Laser Ranging Technology

YZT-CJ-1210A Laser Range Finder Module

12km laser rangefinder module
Handheld rangefinder/Telescope/Outdoor hunting/UAV/Laser detection/Positioning/Car-mounted

Technical Specification

1.Overview

The YZT-CJ-1210A Laser Rangefinder is an eye-safe laser rangefinder within the optoelectronic system, capable of detecting target distances and transmitting the measured distance to the host computer via serial communication.

2.Structural Composition and Main Performance Indicators

The YZ-CJ-1210A Laser Rangefinder consists of a laser, a transmission optical system, a reception optical system, and a control circuit. The main performance characteristics are as follows:

2.1 Main Function

Responds to laser ranging commands, enabling single measurement, continuous

measurement, and stop measurement;

Self-check function

Distance measurement has a gating function

Multi-target ranging capability;

2.2 Performance

wavelength:1535nm±5nm；

Continuous ranging frequency:1~10HzAdjustable；

Ranging Range: Visibility not less than 15km, relative humidity not more than 70%,

diffuse reflection coefficient not less than 0.2, for a 2.3m×2.3m target; maximum range ≥12000m, minimum range ≤50m;

Ranging cycle: 10 minutes of continuous ranging (10Hz);

Ranging Accuracy:≤±3m(RMS)；

Accuracy Rate:≥98%；

Ranging resolution:≤30m(Multi Tasks)；

Emission Aperture: 14.4±1mm, Reception Aperture: 47±1mm

Power Supply Voltage:DC9V～36V；(Adjustable)

Power consumption: average power consumption ≤2W (working at 1Hz), peak power consumption ≤7W, standby power consumption ≤1W;

Dimension:≤101mm×60mm×70mm；

Weight:≤260g；

2.3 Interface Description

Communication Interface: RS422, 115200bps, wiring definition as shown in Table 1;

2.4 External Dimensions, Installation Size Requirements

For detailed information, please refer to the product's three-dimensional envelope and assembly drawing.

Figure 1: Three-dimensional Envelope Diagram

Figure 2: Three-dimensional Diagram of the Rangefinder

2.5 Power Supply Characteristics Requirements

Must meet the requirements for DC power supply characteristics as specified in GJB181A-2003 section 5.3;

2.6 Ventilation and Cooling Method and Heat Dissipation

Natural Cooling

2.7 Reliability Requirements (Assessed with the System)

MTBF (Mean Time Between Failures): The design specifies a value of 4200 hours, with the lowest acceptable value for design finalization being 3400 hours.

2.8 Environmental Technical Requirements

2.8.1 High Temperature Requirements::

Operating temperature range: +60°C, maintain temperature for 2 hours; storage temperature range +65°C.

2.8.2 Low Temperature Requirements::

Operating temperature range: -40°C, maintain temperature for 2 hours; storage temperature range -55°C.

2.8.3 Vibration Requirements

Shock and vibration: Capable of withstanding flight vibration and the shock during takeoff and landing, all equipment can endure the environmental conditions of automobile transportation. Specific requirements are as follows:

Vibration: The vibration spectrum is shown in Figure 3 and Table 2.

Figure 3: Vibration Spectrum

Table 2: Vibration Spectrum Values

The vibration test should be conducted in accordance with the GJB150.16 A -2009 "Military Equipment Laboratory Environmental Test Methods Vibration Test" regulations. The requirements for shock are as follows:

Vertical axis ≥ 10g,

Lateral axis ≥ 10g,

Longitudinal axis ≥ 10g；

The tests should be conducted in accordance with GJB150.18 A -2009, "Military Equipment Laboratory Environmental Test Methods - Shock Tests."

User Precautions

The laser emitted by this rangefinder is 1535nm, which is safe for human eyes. Although it is an eye-safe wavelength, it is advised not to look directly into the laser.

When adjusting the parallelism of the optical axis, be sure to cover the receiving lens to avoid permanent damage to the detector due to excessively strong echoes.

This rangefinder module is not airtight. Ensure that the relative humidity of the environment is below 80% and maintain a clean and sanitary environment to prevent damage to the laser.

The range of the rangefinder is related to atmospheric visibility and the nature of the target. Range will be reduced in fog, rain, and sandstorms. Targets like green tree clusters, white walls, and exposed limestone have better reflectivity and can increase range. Additionally, increasing the angle of the laser beam to the target will reduce the range.

Do not emit lasers at highly reflective targets such as glass or white walls within 20 meters to avoid echo overstrength and damage to the APD detector.

Do not plug or unplug cables while the device is powered on.

Ensure the correct polarity of the power supply connection to avoid permanent damage to the equipment.

ABOUT US

FOVA Technology (Shenzhen) Co.,Ltd. was founded in 2020,the factory is located in Shenzhen,China,the company's core R & D team and technology from China Aerospace Science and Technology Group , the team technical members engaged in related product development more than 4 years of work experience,Led the development of inertial turntable test system,strapdown inertial system,undertake various industries of non-standard test instruments and equipment pre- research,design and production tasks, for navigation, aerospace, aviation , electronics , weapons and other fields of scientific research institutes , colleges and industrial and mining enterprises to provide a large number of high-quality products and services.

FOVA Technology (Shenzhen) Co.,Ltd. has been committed to the design and manufacture of various professional technologies related to the inertial test turntable for many years . Especially in the structural design and manufacturing ,Angle measurement and positioning , speed control , simulation technology and manufacturing technology and other related research has accumulated rich experience and formed the necessary basic conditions in the design , manufacturing , testing process and a high-level professional team , is the most research and development and production of various types of turntable equipment complete capacity manufacturers. At present, it has the ability to develop and produce more than 130 sets (sets) per year. The company has more than 50 professional and technical personnel, mainly engaged in the research and development , design , commissioning and after-sales service of the turntable , the company specializes in supporting professional after-sales installation , commissioning , training services of engineering and technical personnel , so that rapid response , serious and responsible , service in place.

After years of precipitation and efforts in the inertial technology innovation and development , the company has inherited several generations of inertial test bench theoretical technology inheritance , and on the basis of the original technology to develop a new generation of inertial test bench development of the core key technology, has fully independent core technology of inertial platform test system , test simulation equipment and other high-tech series of products . The inertial platform system and inertial strapdown system developed and produced and the corresponding special test equipment have been successfully applied to a variety of strategic and tactical missiles , ship-borne , missile-borne and other key types of tasks .