PEEK GF30 Plastic Molding Raw Material Engineered Thermoplastic Granules

30% Glass Fibre Reinforced PEEK Granules

30% glassfibre reinforced PolyEtherEtherKetone (PEEk)

PEEK with 30% glass fiber is a kind of composite material with significantly improved performance.

Adding 30% glass fiber to PEEK resin greatly enhances the mechanical properties of the material. Its tensile strength, bending strength and hardness are significantly improved, enabling it to withstand greater external forces and loads. At the same time, the addition of glass fiber also improves the dimensional stability of the material, reduces thermal expansion and contraction, and enables it to maintain good shape and accuracy in different temperature environments.

This material also has excellent heat resistance and can work for a long time in high-temperature environments without significant performance degradation. In addition, the wear resistance and chemical resistance of PEEK with 30% glass fiber are also very excellent.

In practical applications, PEEK with 30% glass fiber is often used to manufacture components with high performance requirements, such as automotive engine components, aerospace structural components, electronic equipment housings, etc. For example, in automotive engines, it can be made into high-temperature resistant seals and transmission components to improve the reliability and performance of the car.

Below is our PEEK series, contact us for PEEK material solutions

Dongguan Pries Plastic Raw Materials Co., LTD

Dongguan Pries specialized in custom R & D production of special high-performance plastic high temperature resistance - heat resistance - corrosion resistance - wear resistance - low temperature resistance - ultra high strength - anti-static - conductive - thermal conductivity special engineering plastic modification manufacturers, is also a production of special engineering plastic profiles (sheet, bar, pipe, profile) R & D, sales as one of the manufacturers.

Including granulation molding, extrusion molding, injection molding, mechanical processing, molding, etc., the company plant area of about 10,000 square meters, with about 50 employees, annual production capacity of up to 2,000 tons. About the modification of special engineering plastics, the company has 11 pellet pumping machine production lines, the factory has chemical analysis room, plastic material test room, plate test room, test with large, medium and small injection molding machine 2 sets,

It can test and analyze the mechanical properties, combustion properties, thermal properties and electrical properties of materials, as well as the performance and appearance of plastic products after forming. For the modification and research and development of special plastics, the company mainly uses PEEK, PPS, PEI, PPSU, PES, PSU, PAI, Pl as the base material for functional extension modification production.

1. Mechanical properties: high temperature resistance, wear resistance, precision dimensional stability, enhancement, toughening, cold resistance, fatigue resistance, shock resistance, high rigidity, high torque, etc.;

2, electrical performance: anti-leakage marking, arc resistance, high insulation, stable creepage distance, anti-static, shielding, conduction, etc.;

3, chemical properties, solvent resistance, corrosion resistance, oil resistance, chemical resistance, hydrolysis resistance, etc.;

4, resistance performance: halogen-free flame retardant, environmental flame retardant, high oxygen index, flame retardant wire, VO, SVA, SVB and other levels of flame retardant

5, can be modified according to customer product requirements with various brands of functional additives physical blending modification: glass fiber, carbon fiber, mineral, bicarbonated key, carbon nanotubes, graphite, graphene, teflon, silicon series modification. Production of special plastic profiles with high performance.

At present, the company has more than 40 sheet and bar extrusion production lines and corresponding supporting equipment: high-speed spiral flying machine, centerless grinder, engraving machine, CNC lathe, CNC milling machine, etc., and has a comprehensive testing equipment: Impact strength tester, high temperature fat melting tester, friction and wear tester, digital display torque tester, surface hardness tester, density tester, mechanics tester, moisture tester, ultrasonic tester, etc.

Main production: PEEK, PPS, PEI, PES, PPSU, PSU, PAI, Pl, PBI and other high-performance plate, bar, pipe, profile and workpiece products. Through the continuous innovation and development of technology and new applications, profiles are now widely used in: electronic appliances, instrumentation, automobile manufacturing, aviation

Aerospace, military industry, nuclear industry, petroleum industry, chemical industry and other high-temperature industry, general machinery, packaging machinery, tobacco machinery, welding machinery, food machinery, medical equipment, textile printing and dyeing, paper making machinery, electronic semiconductor, compression parts and other fields. The company will uphold: integrity, innovation, service, win-win business philosophy, technology as the guide, quality as the center, service as the focus, around the customer's requirements for product performance and rapid delivery and highly competitive market prices to provide customers with a full range of services!