IPC704 244-704-000-511 Signal Conditioner For Sensors Using Standard Piezoelectric Materials

IPC704 244-704-000-511 Signal Conditioner For Sensors Using Standard Piezoelectric Materials

Product Details:

Description:

The IPC704 signal conditioner converts the chargebased signal from a piezoelectric-based transducer into a current or a voltage signal. This current or voltage signal is transmitted to the processing electronics via a standard 2-wire or 3-wire transmission cable.

The current modulation technique allows transmission over a distance of up to 1 km. A GSI galvanic separation unit is required for this configuration.

The electronic circuitry of the IPC704 signal conditioner is incorporated into a moulded aluminium enclosure. The signal conditioner has configurable high-pass and low-pass filters and an optional integrator to give a velocity output. Furthermore, RFI filters protect the input and output against radio frequency interference and other electromagnetic influences.

A range of installation options are available for the IPC704 signal conditioner, including:

(1) A polyester enclosure providing environmental protection against dust, oil and water jets.

(2) A mounting adaptor allowing the IPC704 signal conditioner to be mounted on a DIN rail.

Two versions of the IPC704 signal conditioner are available:

(1) An IPC704 for sensors using standard piezoelectric materials, for example, CAxxx, CP10x and CP2xx (ordering number 244-704-000-042-...).

(2) An IPC704 for sensors using GaPO4 piezoelectric material, for example, CP50x (ordering number 244-704-000-511-...).

Features

(1) For CAxxx piezoelectric accelerometers and CPxxx dynamic pressure sensors

(2) Configurable high-pass and low-pass filters

(3) Frequency range: 0.5 Hz to 20 kHz

(4) Optional integrator to produce a velocity output

(5) Optional 2-wire current or 3-wire voltage transmission

(6) Certified for use in potentially explosive atmospheres

(7) A range of installation options are available

Order Information

Joyoung International Trading Co.,Ltd is not only the world's leading industrial equipment supplier, but also has been committed to the production of automation control system modules and spare parts for ten years.

We are located in Xiamen, a famous tourist city in China.

We are the world's leading industrial equipment supplier, specializing in the production of automation control system modules and spare parts for several years. We purchase from factories of world famous brands, such as konnad (general agent in China), Bently Nevada, abb, Invensys Triconex, GE Fanuc, Foxboro, Emerson, Epro, Schneider Modicon, Westinghouse, Siemens, Woodward, hima, Yaskawa, Bosch Rexroth, Rosemount, etc.

All of kinds of DCS、PLC parts as below:

ABB:

AC800M series module,Industrial robots spare parts DSQC series ,Bailey INFI 90,800xA,Advant OCS with Master Software,with MOD 300 software Advant OCS,Freelance - Distributed Control System for Process Industry,Symphony Melody,Satt OCS,Symphony DCI System Six,Harmony/INFI 90,Security system

Rockwell Allen-Bradley:

SLC500: 1747/1746 series

MicroLogix: 1761/1763/1762/1766/1764 series

CompactLogix: 1769/1768 series

Logix5000: 1756/1789/1794/1760/1788 series

PLC-5: 1771/1785 series

Bently Nevada:

3500/3300 Surveillance protection syste,Proximitor eddy current sensor probe

EPRO:

PR6422/PR6423/PR6424/PR6426 eddy-current transducer,PR9268 series Electro dynamic absolute vibration sensor MMS6000 system

VIBRO-METER:

Vibrating sensor,Acceleration sensor ,Eddy-current transducer,Monitor system module,Gateway communication module

Schneider Modicon:

Quantum 140 series:CPU processor module,Communication module,Analog input output module,Digital input output module

GE:

IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module ,Communication module ,Analog digital module

EX2100,EX2000Excitation system card ,IS200 series DS200 series

Invensys Triconex:

Redundant fault-tolerant control system,the most modern fault-tolerant controller based on triple-module redundancy (TMR) architecture

Westinghouse:

OVATION system,WDPF system,WEStation system

Honeywell:

Alcont,Experion LS,Experion PKS,Experion HS,Plant Scape

TDC 2000,TDC3000,TPS,security system

Emerson:

DeltaV system Dual - channel redundant security system Redundant controller

Power supply module I/O unit Analog AI modules Analog AO module

Siemens:

Siemens MOORE, 6ES5 series,6GK series,6DD series,6AR series

Yokogawa:

CS3000 system CPU control module,Analog module

Yaskawa:

Robots spare parts,Servo controller, Servo motor, Servo drive

Motorola (MVM):

MVME 162, MVME 167, MVME 1772, MVME 177 and other series

XYCOM:

I / O VME boards and processors.

Bosch Rexroth:

Indramat, I / O modules, PLC controllers, Drive modules, and so on.

Rosemount:

Pressure Transmitter, Flow meter

KONRAD:

EC6423/EC6424/EC6426/EC6430/EC6432/EC6433 series eddy-current transducer

EC20382 displacement sensor,MMS7000 Surveillance protection system

ENTEK:

Eddy-current transducer probe，Vibration monitoring table double channel axis vibration monitoring table C6652

Invensys Foxboro:

I/A Series system,FBM(input / output modules) sequential control,Ladder logic control, Accident recall processing,Digital-to-analog conversion,Input / output signal processing,Data communication and processing

Woodward:

SPC valve position controller 505/505E(9907-162,9907-164,9907-165,9907-167)digital controller

2301A controller 9905 series 2301D-ST series