Ductile Iron Remote Ball Cock Standard For Water Level Control Float Ball Valve

Ductile Iron Remote Ball Cock For Water Level Control Float Ball Valve

Product introduction:

Hydraulic control valve is a device used to control water flow rate. Based on the pressure difference between upstream and downstream in the pipeline system, it achieves hydraulic differential operation of the diaphragm or piston through the control effect of the internal pilot valve, thereby automatically adjusting the opening, closing or regulating status of the main valve disc.

When water flows into the valve body and pushes the diaphragm or piston, these components will move, thereby controlling the opening or closing of the valve. Specifically, when the pressure water in the control chamber above the diaphragm or piston is discharged into the downstream low-pressure area, the pressure acting on the bottom of the valve disc will cause the valve disc to fully open. On the contrary, if the pressure water cannot be discharged to the downstream low-pressure area, the valve disc will be pushed to the fully closed position. When the pressure value in the control room is between the inlet pressure and outlet pressure, the valve disc is in a regulating state, and its regulating position is determined by the joint control effect of the needle valve and adjustable pilot valve in the conduit system. The adjustable pilot valve will automatically adjust the opening of its own valve according to the changes in downstream pressure, thereby changing the pressure value in the control room and achieving precise control of flow.

The 100X series remote ball cock product is designed and manufactured by our engineering and technical team, which absorbed the advantages of similar products home and abroad. The valve body adopts a full-channel streamline design, with small fluid resistance, large flow rate and good sealing effect. Due to the pipe control system installed on the main valve, the hydraulic operation can automatically control the liquid level of the water tower or pool, simple maintenance, flexible and durable, high accuracy of liquid level control, water level is not interfered by water pressure and tight closure, high efficiency and energy saving, strong and durable.

Product technical parameter:

Product features:

The 100X diaphragm remote ball cock is a hydraulic operated valve that combines multiple functions.

1. It can be Installed at the inlet of a pool or elevated water tower, the float valve controls the main valve to automatically replenish water.

2. Accurate liquid level control, not affected by water pressure interference;

3. It can be installed at any position according to the height and usage space of the water pool, with convenient maintenance, debugging, and inspection, reliable sealing, and long service life.

4. Diaphragm valves have reliable performance. High strength and flexible movement, suitable for pipes with a diameter of 450mm or less. It is recommended to use piston type for diameters above DN500MM.