PGB-810 2 Part PU Silicone Epoxy Resin Doser Ab Glue System Production Machinery for Electronic Board

PGB-810 2 Part PU Silicone Epoxy Resin Doser Ab Glue System Production Machinery for Electronic Board

Machine specification:

Introducing the PGB-810 2-Part PU Silicone Epoxy Resin Doser AB Glue System, designed to streamline your electronic board production with precision. This 2k dispensing system ensures consistent mixing and dispensing of epoxy, PU, and silicone resins, ideal for polyurethane potting and adhesive dispensing applications. Our epoxy pump and potting compound dispensing equipment are engineered to handle AB epoxy resin and component glue, ensuring optimal performance for PCB potting and epoxy resin factory processes.

The mixing glue technology and glue dispensing equipment offer superior control over two-part resin applications, from epoxy resin as glue to glue for epoxy resin. This system also supports silicone epoxy resin formulations and is compatible with an adhesive dispensing gun for seamless operations.

For high-precision needs, the CNC glue machine and epoxy dispenser gun make it easier than ever to manage epoxy resin AB glue production. Whether you're manufacturing glue epoxy resin or 2 part adhesive, our silicone dispensing filling system guarantees a flawless mix and application, perfect for potting in manufacturing environments. Upgrade your production with the PGB-810 and experience the difference of better glue.

Applicable Material:

1K and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials. Two componen potting materials , 2-part compound materials, AB part compound materials , 2K silicones ,2K epoxies resin, Bi-component PU, Ployerster, Polyurethane, UV materials and so on .

In applications the dual cartridges are impractical due to large quantities used. Daheng Dispensing equipment can be used to assure the correct mix ratio, then the adhesive is dispensed through adynamic /static mix nozzles tip.
D&H double cylinder plunger pumps, Gear pumps and screw pumps for metering and mixing dispensing is ideal for Low-medium and higher viscosities epoxies, silicones ,polyurethanes to meet up with mediumto high production outputs.

Double Cylinder plunger pumps’ metering and mixing dispensing design is preferred for lower viscosity adhesives and are used in fully automated high-quality production environments.

System Introduction:
1. Working Mode: controlled by PLC module and MCGS touch screen.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
3. Core metering pump specially design for different material from low to high viscosities.
4. Mix glue A & B more evenly; no more or no less for agent B.

Working principle :
Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.

Tank system technology:

1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .
2. Tank with motor stirrer that prevent the glue from sediment and keep the potting material in constant temperature.

Other Sucessful cases :

Our solutions find application in a wide range of fields including:

1. Potting & Casting: Electronics components, PCB boards, capacitors, power supplies, transformers, ignition coils, reverse sensors, circuit boards, filter products, underwater parts, electronic ballasts, aviation parts, and aerospace components. Achieve flawless encapsulation and sealing with our AB Resins Compound Dosing and Dispensing Potting System. Ensure reliableprotection for sensitive electronic components with our Vacuum Potting Casting System Machine.

2. Dispensing & Dosing: LED strips, LED lamps, LED bulbs, aluminum, LED screens, display modules, medical parts, and medical liquid filling. Streamline your production line with our Two-Component Dispensing Machine and Dual-Component Dispensing Machine. From LED encapsulation to medical liquid filling, our equipment enhances efficiency and product quality.

3. Bonding & Doming: LCD screens, LOCA bonding, ABS plastic, different types of stickers, badges, keychains, souvenirs, arts,photo frames, and other graphic applications. Trust in our expertise in Metering, Mixing, Pouring, and Potting to elevate your production capabilities. Our solutions ensure precision and accuracy in every application, from bonding to doming.

Our machine solutions are suitable for all kinds of epoxies, PU, and fluid applications for different industrial products. Whether it's electronics, medical devices, aerospace components, or consumer goods, our dispensing technology delivers optimal performance and reliability.
Experience the future of manufacturing with our Dynamic and Static Mixing Systems. From Sealing to Casting, our comprehensive range of equipment covers all your dispensing needs.
Elevate your production capabilities today with our high precision and accuracy dispensing solutions.

Two questions before purchase:

1.What’s type of glue do you use ? What’s the base characteristic ?
A)One-component or two-component (A&B glue)；
B)What is the AB ratio if two-component.
C) What’s the viscosity and densityof a and b component separately.
D)How long does it start to curing , and what is the completely curing time .
E)What’s the packing of the glue .

2.What’s the dispensing process technological requirement ?
A)What is the glue accuracy with each product ?
B)What’s the purpose of gluing ? Filling , sealing ,paste,insulation, moisture proof ?
C)How to glue the product ?

FAQ

1. Do you offer oversea service?
We do not have overseas service center,but we can offer oversea service if customer required, engineer will offer face to face service.

2. How dose your factory do regarding quality control?
We assure 1 year warranty for the main part,also we offer spare part for back up.
Please check with sales engineer in detail.

3. What are your payment terms?
Normally, 30% advance by T/T and balance paid off before delivery. Other payment terms are negotiatible .

4. Are you a factory or trading company ?
We are a factory with SGS certified and more than 20 patents,and cooperate with different customers coverd about 60 countries for over 18 years.

Staff Training

Seller is responsible to provide machine’s training including installation, debugging, maintenance to assured customer can totally use the operation skills and well acknowledge maintenance of machine .

Maintenance Service

2.1Seller provide one year warranty period and support free maintenance service during warranty . Software upgrade service is provided for a long life time.
2.2 In case parts of the machine become broken within the warranty because of non-artificial factors, we send you part
replacement free, buyer pay for the shipment. Double-liquid valve should be bought at its cost price.
2.3If the parts of the machine become broken past warranty , the parts replacement should be shouldered by buyer.

Common troubles and solutions:

The most common trouble of glue dispenser is the valve . We list the effective solutions as follow:

1.Glue dispenser always drops
Drops always happened when valve closed . The reason may be low concentration of glue , big air-pressure or large diameter of needles.Narrow needles will effect the flow of the liquid and cause back pressure . It will lead to dropping when the valve closed . Too narrow needles will effect the drainage of air when valve start to work, but it can be solved if change suitable needles .Conical needles with less back pressure and liquid flow smoothly .It is better to drainage of the air advance or use no-foam glue or deaeration to avoid the air cause dropping after valve closed .

2.Glue dispensing not evenly
The problem cause mainly because of the storage flow pressure tank or air pressure is not stable.
Inlet pressure regulating table should be set lower 10-15psi than factory minimum pressure . The pressure in pressure tank should be set upper than the middle pressure of regulating table . It should be avoided to use the pressure lower than the middle pressure of regulating table . Control pressure of rubber valve at least higher than 60psi to assured glue evenly .
We should check the glue output speed at last . The glue is uneven if the time less than 15/1000s , the output speed more longer , the glue dispensing will be more stable .

3.Slow flow velocity
It should be changed the pipe from 1/4 to 3/8 if the flow velocity too slowly .
The pipe is the shorter the better if no requirement .

4.Air in the fluid
Excessive fluid pressure and short valve opening time may lead to the air infiltration liquid . We can use the conical needles and reduce fluid pressure .

5. Instant glue (quick adhesive) blocking in valve connector and pipes.
This problem is caused by heavy moisture and recycle instant glue . We should make sure to use new instant glue and wash the pipes with dry . Make sure air dry and add filter between plant air pressure and valve .

6.UV glue (UV curing glue )
Make sure to use black pipeline.
Don’t add new UV glue to old UV glue in pressure tank , we should drain off the old UV glue before pouring new UV glue into pressure tank because the UV glue will produce bubble after a period of time and lead to glue dispensing unevenly .

7.Needles
Normally , it may cause air problem if the needle less than NO.20 . It is better to use large steel needles or conical needles to avoid to use winding needles or teflon needles

8. Epoxy cleaning
It is better to use storage pressure cylinder of methybenzene toluene to self-cleaning one time for each shift . The more
frequently cleaning the better .

Introduction of Guangzhou Daheng Automation Equipment Co.,Ltd

D&H is a company who has its own core tech and provides professional glue controlling solutions in the industry.
In 2006 we developed the patent-“double cylinder plunger pump”,the glue dispensing machine with such a pump type was launched into the market successfully.This patent design becomes the heart of a new generation of metering device.The new design leads the liquid controlling device into a direction of high filling,high precision ,high crystallization,high output speed and production line.
In 2015 we deveoloped the core patent-“Intelligent Gluing”,the first intelligent glue dispenser in the world was launched into the market.The new generation machine will achieve calculation,communication,remote-control and self-management;push forward the development of the intelligent equipment and intelligent factory.
With over 20 patents our machines are widely applied in the industry like LED,lighting,automobile,the electronics,power
supply,capacitor,transformer,circuit...
We are headed in Guangzhou China,built branches in Shenzhen,Beijing,Shanghai,Xiamen,Chongqing,Zhongshan...;We also cooperated with customers from over 30 countries such as Germany,the USA,South Korea,Russia,India...We are becoming lading among our conpetitors in the industry.
We believe in “Success Comes from Details,Innovation Improves the Future”.We provide our customers the service support 24h*7days,monthly training-up,software-upgrade,keeping improvement and making us more perfect.
We are searching for the agents and cooperative partners from different countries,hoping,with you together,to provide the best adhesive control solutions for the customers in the world.

Shipping and delivery:

Packed with standard exporting polywood cases

Company Introduction
Guangzhou Zhengqi Technology Co., Ltd. recognized as a national high-tech enterprise, specializes in automation system integration and services, offering cutting-edge products and solutions to global markets.
Guangzhou Daheng Automation Equipment Co., Ltd. operates as a wholly-owned subsidiary of Guangzhou Zhengqi Technology Co., Ltd., forming a synergistic partnership that drives innovation and excellence within the group.
As the production and development arm of the group, Daheng Automation excels in the design, manufacturing, and maintenance of adhesive control process equipment and production lines. It serves diverse industries, including new energy, automotive, electronics, lighting, and intelligent manufacturing, catering to both domestic and international markets. Daheng Automation has established itself as a pioneer in liquid control technologies. In 2006, the company introduced the patented “double-cylinder plunger pump,” a groundbreaking innovation in adhesive dispensing. This technology revolutionized high-performance metering systems, enhancing precision and efficiency, particularly for applications involving high-viscosity, high-crystallization, and high-output-speed materials. In 2015, Daheng Automation launched the world’s first "Intelligent poting machine" dispenser. This revolutionary product integrated advanced computation, communication, remote control, and self-management functionalities, marking a significant milestone in adhesive control technology. Until 2024, with over 60 patents, Daheng Automation continues to lead the industry in technological advancements.
While Daheng Automation drives innovation in production and equipment development as an international brand. Zhengqi Technology focuses on overseas sales, international trade, and strategic market expansion. Together, the companies operate under a unified legal and financial framework, ensuring operational efficiency and cohesion.

The headquarter is located in Guangzhou, China, Daheng Automation has established branches in key cities such as Shenzhen, Beijing, Shanghai, Xiamen, and Chongqing. The company collaborates with clients in over 60 countries, including Germany, the USA, South Korea, Russia, and India, reflecting its strong global footprint.
Guided by the philosophy “Success Comes from Details, Innovation Improves the Future,” Daheng Automation and Zhengqi Technology prioritize customer satisfaction through 24/7 support, regular training programs, software upgrades, and continuous product improvement. Their unwavering commitment to quality and innovation solidifies their position as global leaders in adhesive control solutions.

#mixing #metering #Pouring #potting #dispensing #Dosing #encapsulating #spraying #sealing #filling #casting equipment