| Sign In | Join Free | My frbiz.com |
|
| Sign In | Join Free | My frbiz.com |
|
| Categories | Glue Potting Machine |
|---|---|
| Model NO.: | PGB-1200 |
| Glue Type: | Ab Glue |
| Application: | Machinery & Hardware |
| Driven Type: | Electric |
| Packaging: | Cartons |
| Xyz Working Area: | 700 X 700 X 30mm |
| Size: | L1500xw1200xh1500mm |
| Weight: | 260kg |
| Ratio: | From 1:1 to 10:1 |
| Stiring Method: | Static or Dynamic |
| Pump: | Daheng Patent Plunger Pump |
| out-Gluing Rate: | 5-66g/5s |
| Mixing Precision: | +/-1% |
| Container Volume: | a:25L B:10L |
| Name: | LED Driver Glue Dispenser |
| Transport Package: | Quality |
| Specification: | CE |
| Trademark: | Daheng or OEM |
| Origin: | Guangzhou China |
| HS Code: | 8424899990 |
| Supply Ability: | 50PCS / Month |
| Package Size: | 100.00cm * 100.00cm * 100.00cm |
| Package Gross Weight: | 100.000kg |
| Automatic Grade: | Automatic |
| Gluing Mode: | Piston / Plunger Pump |
| Packaging Material: | LED Display |
| Customization: | Available | Customized Request |
| Shipping Cost : | about shipping cost and estimated delivery time. |
| : | Initial Payment Full Payment |
| Currency: | US$ |
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
| Company Info. |
| Guangzhou Zhengqi Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
| Working area | 700mmx 700mm×100mm |
| Output Speed | 0.5g/s -12g/s (per single pump)adjustable Example: 1:1 ratio max output 24g/s 10:1 ratio max output 13.4g/s |
| processing craft | Dot ,line , arc , circle |
| Speed | 0---250mm/s |
| Movement accuracy | ≤±0.1mm |
| Mixing ratio | 100:100 ---100:10 |
| Gluing-out speed | 1g/s --12g/s per single pump (Max dispensing volume is base on two part Ratio) |
| Repeated accuracy | ≤±2% |
| Program memory | 999pcs |
| Adhesive viscosity | 300cps~20000cps |
| Operating mode | Manual /Automatic / third party signal |
| Proportional control | PLC/ double cylinder plunger pump |
| Flow control | Digital input |
| Program | Teaching program |
| Automatic controlling system | Touch screen / hand terminal |
| Mixing way | Dynamic mixing |
| Cleaning way | Self-cleaning |
| Glue Tank | Stainless tank A (25L) B(25L) |
| Vacuum defoamation(-0.1MPa),4L/s | |
| Liquid level sensor and sound light alarm | |
| Tank stirring | |
| Power supply | 220V/50Hz/3500W |
| Input air pressure | 0.4MPa-0.7MPa |
| Dimension | |
| Materials | Industrial aluminium+stainless material |
Drops always happened when valve closed . The reason may be low concentration of glue , big air-pressure or large diameter of needles.
Narrow needles will effect the flow of the liquid and cause back pressure . It will lead to dropping when the valve closed . Too narrow needles will effect the drainage of air when valve start to work, but it can be solved if change suitable needles .
Conical needles with less back pressure and liquid flow smoothly .
It is better to drainage of the air advance or use no-foam glue or deaeration to avoid the air cause dropping after valve closed .
The problem cause mainly because of the storage flow pressure tank or air pressure is not stable.
Inlet pressure regulating table should be set lower 10-15psi than factory minimum pressure . The pressure in pressure tank should be set upper than the middle pressure of regulating table . It should be avoided to use the pressure lower than the middle pressure of regulating table .
Control pressure of rubber valve at least higher than 60psi to assured glue evenly .
We should check the glue output speed at last . The glue is uneven if the time less than 15/1000s , the output speed more longer , the glue dispensing will be more stable .
It should be changed the pipe from 1/4 to 3/8 if the flow velocity too slowly .
The pipe is the shorter the better if no requirement .
Excessive fluid pressure and short valve opening time may lead to the air infiltration liquid . We can use the conical needles and reduce fluid pressure .
This problem is caused by heavy moisture and recycle instant glue . We should make sure to use new instant glue and wash the pipes with dry . Make sure air dry and add filter between plant air pressure and valve .
Make sure to use black pipeline.
Don't add new UV glue to old UV glue in pressure tank , we should drain off the old UV glue before pouring new UV glue into pressure tank because the UV glue will produce bubble after a period of time and lead to glue dispensing unevenly .
Normally , it may cause air problem if the needle less than NO.20 . It is better to use large steel needles or conical needles to avoid to use winding needles
It is better to use storage pressure cylinder of methybenzene toluene to self-cleaning one time for each shift . The more frequently cleaning the better .
|
Electric Driven Potting Machine for AB Materials in Semiconductor Parts Vacuum Equipment
Automatic Two Components Glue Mixer and Dispensing Machine for Vertical Installation
Durable Two Component Vacuum Potting Dispensing System for Epoxies PU Silicones Adhesive
Vertical Installation Gluing Machine Operator for High Precision Dispensing Equipment
Vertical Installation Adhesive Dispensing Systems with High Precision Gluing Machine
Glue PGB-810 2 Part PU Silicone Epoxy Resin Doser System for Electronic Board Production
Manufacturing Plant 2 Part Silicone Epoxy Resin Meter Mix CNC Glue Dispensing Machine
Shipping Cost Automated Adhesive Dispensing Systems Ab Glueing Machine Customization
Industrial Grade Automatic Resin Dispenser 180kg Capacity High Out-Gluing Efficiency
Dynamic Stiring Method Automatic Glue Sealing Machine with Daheng Patent Plunger Pump
