4tnv92 4tne92 4d92 Gasket Kit for Yanmar Engine Parts 129901-01350

4tnv92 4tne92 4d92 Gasket Kit for Yanmar Engine Parts 129901-01350

Engine introduction

The 4TNV92 engine is a diesel engine designed and produced by Japanese diesel engine manufacturer Yanmar Company. The following is some basic introduction to the 4TNV92 engine:
1. Structure and displacement: The 4TNV92 engine adopts an in-line four-cylinder, four-stroke structure. The usual displacement is 1.8 liters (1796cc).
2. Fuel system: This engine uses a direct injection fuel system, which injects diesel directly into the cylinder through the injector. Direct injection technology improves combustion efficiency and power output while reducing fuel consumption and emissions.
3. Power and Torque: Specific power and torque outputs vary by vehicle model and trim. Generally speaking, the power of the 4TNV92 engine ranges from 22 to 45 kW and the torque ranges from 90 to 180 N·m.
4. Technical features: The 4TNV92 engine uses turbocharging and intercooler technology to provide higher power output and fuel economy. The turbocharger increases intake airflow pressure, improving low-speed torque and power response. The intercooler cools the intake air, increases the oxygen density of the intake air, and further improves combustion efficiency.
5. Appliion scope: 4TNV92 engine is mainly used in small construction machinery, agricultural equipment, ships and other fields. With its compact, lightweight and efficient features, it performs well in small work spaces and scenarios with low power requirements.

Installation introduction

Installing the 4TNV92 engine requires certain mechanical knowledge and expertise. The following are general installation steps, but please note that specific installation procedures may vary based on vehicle type, configuration and appliion. It is recommended that you refer to the relevant vehicle manual or consult a professional technician before installation to ensure correct installation and operation.
1. Preparation: Make sure the installation area is clean and remove the old engine (if applicable). Check the new 4TNV92 engine and corresponding installation accessories to ensure that all parts and accessories are complete.
2. Install the engine base: Install the engine base or bracket according to the structure of the vehicle. Make sure the base is strong and stable and can bear the weight of the engine.
3. Connect the transmission system: Connect the components of the transmission system (such as clutch, transmission, etc.) to the crankshaft of the engine. Make sure connections are made correctly, using appropriate connectors and tightening torques.
4. Install the cooling system: Connect the pipes and radiators of the cooling system to ensure that the coolant in the cooling system can circulate and dissipate heat properly.
5. Install the exhaust system: Connect the exhaust pipe and muffler to ensure that the exhaust gas in the exhaust system can be discharged correctly.
6. Connect the fuel system: Connect the fuel supply pipe and filter to ensure that fuel can be supplied to the engine smoothly.
7. Connect the electrical system: Connect the engine's electrical system, including battery, starter, generator, etc. Make sure the electrical connections are correct and the circuit is reliable.
8. Ensure adjustment and alignment: After completing installation, check that all connections and components are tight. Ensure smooth operation of the transmission system and check cooling, exhaust and fuel systems for tightness and proper operation.
9. Testing and debugging: Before starting the engine, perform necessary testing and debugging, including checking oil pressure, coolant temperature, fuel supply, etc. Make sure the engine runs smoothly, has no abnormal sounds and works normally.

Company Profile

 广州腾松工程机械设备有限公司，专业柴油发动机配件，18年行业经验，专注于工程机械、农业、发电机组、船舶、挖掘机、装载机、推土机、平地机、起重机、卡车、叉车等DAILY REFINING品牌机械发动机配件。我们与欧洲、美洲、中东和东南亚地区合作，并在50多个国家建立了业务关系。

DAILY REFINING品牌：品质与创新的发动机零部件品牌

DAILY REFINING 是一个致力于提供高品质创新型发动机零部件的品牌。通过持续的研发和严格的质量控制，DAILY REFINING 为全球汽车和机械行业提供高品质的发动机零部件解决方案。本文将介绍 DAILY REFINING 品牌在发动机零部件领域的核心价值、技术实力及其卓越地位。

DAILY REFINING 的品牌核心价值体现于其对品质和可靠性的承诺。他们注重产品性能、耐用性和安全性，并致力于为客户提供卓越的发动机零部件。品牌价值观包括卓越的品质、领先的创新能力和客户满意度，这些价值观贯穿于 DAILY REFINING 的产品和服务之中。

日精拥有专业的研发团队和先进的生产设备，奠定了坚实的技术实力基础。他们持续投入研发，并与行业领先的合作伙伴携手，不断推动发动机零部件技术的创新。日精的发动机零部件经过严格的测试和质量控制，确保其在各种工况下的可靠性和卓越性能。

DAILY REFINING 的发动机零部件产品线广泛覆盖船舶、工业机械等多个应用领域。我们提供活塞、曲轴、缸套、缸盖等各种类型的零部件，以满足不同发动机的需求。无论是传统的燃油发动机还是先进的电动汽车发动机，DAILY REFINING 都致力于提供高质量、高性能的发动机零部件。

DAILY REFINING对产品质量有着严格的把控和保障。他们采用先进的生产工艺和质量管理体系，确保每一个发动机部件都符合高标准。DAILY REFINING的零部件经过长期的实验和验证，即使在严苛的工作环境下也能保持稳定可靠的性能。

作为一家专注于品质与创新的发动机零部件品牌，DAILY REFINING凭借卓越的技术实力和不懈的努力，在业界树立了良好的口碑。他们提供多样化的发动机零部件解决方案，为全球汽车和机械行业的发展做出了重要贡献。未来，我们期待DAILY REFINING继续引领发动机零部件领域的创新，为客户提供更可靠、更高性能的发动机零部件，推动整个行业的发展。