Heat Transfer Printing DTF Film 30cm 33cm 60cm Single Side Matte DTF PET Film Roll

Heat Transfer Printing DTF Film 30cm 33cm 60cm Single Side Matte DTF PET Film Roll

Width and Length: DTF film rolls are available in various widths and lengths to accommodate different printing requirements. The width of the film roll should be compatible with the printing capabilities of the chosen printer, while the length determines the number of prints that can be produced before needing to replace the roll.

Storage and Handling: DTF film rolls should be stored in a cool, dry place, away from direct sunlight or excessive heat, to prevent degradation of the film and adhesive properties. The rolls should be handled with clean hands or gloves to avoid transferring dirt, oil, or moisture onto the film surface.

Reusability: DTF film rolls are typically designed for single-use, meaning they are intended to be used for one transfer process. Once the design is successfully transferred to the fabric, the film roll is peeled away and discarded. However, some film rolls may be reusable for a limited number of transfers, depending on the quality and condition of the film and adhesive layer.

DTF PET Film Physical Characteristics:

Cautions:

1. Tear-off method: cold or hot tear.

2. Printed film is a soft product. It is normal for the surface to be slightly sticky, and the surfaces should be prevented from sticking to each other.

3. Reasonable control of temperature and pressing time. If the temperature is too high or the time is too long, it is easy to cause discolouration or loss of elasticity.

Application of DTF PET Film:

WHY CHOOSE US

1. Customised services

2. Professional after-sales service

3. Low price

4. High quality

Save a lot of cost and money.

Make printing easier.

5. Security

Faster speed and lower cost.

Environmentally friendly Non-toxic and odourless. No toluene.

Shenzhen Tunsing Plastic Products Co.,Ltd. was established in 2007 and is located in the forefront of technology in Shenzhen City, China, covering an area of 10,000 square meters. It has a professional polymer technology team led by Master and PhD engineering. Our company specializes in R&D, production and sales of various modified hot melt adhesives, hot melt adhesive granules, hot melt adhesive film,hot melt adhesive powder, functional film coating, ultra-fine cryogenic powder grinding and die-cutting products.

Our company has multi-functional laboratory for material analysis experiments, thermal analysis experiments, mechanical performance experiments, and environmental experiments. Experimental workshop with twin-screw underwater cutting testing machine, casting tensile testing machine, scraper coating test machine, liquid nitrogen cryogenic grinding test machine. While systematically controlling R&D, incoming materials, planning, production, quality and other links, our company can also simulate the processing and application testing of different needs of customers.

Manufacturing equipment:

Our company is currently equipped with four sets of functional hot melt adhesive film and functional film casting production lines,

Three sets of hot melt adhesive film scraper coating production lines,basically realize the three-standard mass production mode of standard machines, standard materials, and standard specifications. The whole line is equipped with automatic infrared thickness control, automatic online detection OCR optical defect recognition system.

Our company has standardized mass production and perfect online testing process and database. There are a modified hot melt adhesive underwater granulation production line, it is mainly to meet the market demand for modification of different functional hot melt adhesives,fully automatic ultra-fine cryogenic grinding production line, with an annual output of 2,500 tons of powder hot melt adhesive,round knife combination die cutting and flat knife combination cross cutting and precision slip shaft winding and slitting machine and one set of composite unit.

Our company specializes in R&D, production and sales of TPU, PA, PES, Polyolefins, SBS, SIS, EVA, EAA and other hot melt adhesive series products with different materials and functions, such as granules, films, and powders，which widely used in 3C electronics, 5G, Automobiles, precision instruments, medical care, luggage, handbags, sporting goods, clothing, footwear, hats and so on.

The company has passed ISO9001:2015 quality management system, ISO 14001:2015 environmental management system and ISO 45001 occupational health and safety management system certification, and adopts the two-way standardized combination model of ERP and ISO9001 to systematically control all aspects of R&D, incoming materials, planning, production and quality. All the products comply with environmental protection standards such as RoHS, REACH, Oeko-tex and other environmental standards, and we are committed to creating an environment-friendly factory.

Customer visit

Smart Cards Expo 2018

Trustech 2018

Finally, thanks for visiting our website. we warmly welcome your inquiries. We warmly welcome you connect with us and establish friendly relationships together!