ASTM ASME Standard TP301 Stainless Steel Seamless SS Round Tube 1 1/2 Quot Sch10

ASTM ASME Standard TP301 Stainless Steel Seamless SS Round Tube 1 1/2" Sch10

301 is the most easy cold deformation strengthening steel grade, by cold deformation processing can make the strength of steel, hardness, and retain enough plastic and toughness, together with the steel under the condition of the atmosphere with good rust resistance, but the poor corrosion resistance, reducing medium in acid and alkali salt chemical medium corrosion resistance is poorer, therefore is not recommended for corrosion harsh environment. 301 is mainly used in cold working state to withstand high load, but also want to reduce the weight of equipment and do not rust equipment parts

Product introduction:

Product Display :

Chemical Composition:

Physical Property:

The following table is the size of the stainless steel seamless tube. For any other detail information, please feel free to contact us.

Typicall material :

SCH Table:

Surface Finish:

Packaging:

ASTM ASME Standard TP301 Stainless Steel Seamless SS Round Tube 1 1/2" Sch10 packaging details:

1: Pipes be covered with waterproof protective packing materials;

2: Then be bundled with strips together;

3: Well loaded and be transported to the loading port.

The inner size container as below:

1:20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM ;
2:40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM ;
3:40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM.

WHY CHOOSE US:

Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will show you the photos of products and package before you pay the balance.

Q2: what is the terms of delivery?
A: FOB, CIF, CFR,

Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirement.

Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within 7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after receiving the deposit.

Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique drawings, we could build the mold and fixtures.

Q6: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is available in stocks, however, the the transportation fee is borne by buyer.