288cores IP68 FTTH Dome Fiber Optic Splice Closure Heat Shrink Seal Aerial Mounted

288cores FTTH Closure Features

• Made of high quality engineer plastic, good strength
• Fiber storage basket at back
• Sealing way of cables: heat shink seal cable port
• Quality warranty: 2 years
• Life span:more than 25 years
• IP rating is IP68

Fiber Optic Joint Box Specification

The splice closure is total closed with self-lock clamp, and IP68 waterproof ring, each cable port internal with metal screws and fixtures.

-------------------------------------------------------------------------------------------------------------------------------------------------------

Max. hold 6pieces splice trays, each tray hold 6fibers/layer, dual fiber 48cores, maximum 48cores in total; The back fiber holding tray is fix on bottom with screws and large management area.

--------------------------------------------------------------------------------------------------------------------------------------------------------

--------------------------------------------------------------------------------------------------------------------------------------------------------

Fiber Splicing Box Accessory list:

-------------------------------------------------------------------------------------------------------------------------------------------------

Operation conditions:

1. Temperatures: -40℃~+65℃
2. Humidity: ≤95% (at 40℃)
3. Air Pressure: 70kPa ~106kPa

Technical Specifications:

1.Seal performance: after the box is sealed, inflate to 100kPa inwards (inflation only apply to the

models with the air hole), and then soak it in the water of normal temperature, after 15 minutes

of steady observation, there is no bubble to overflow.

2. Insulation resistance: the insulation resistance between the metal work piece and the earth is

greater than 20kMΩ.

3. Pressurization: there is no breakdown or flash over under 15kVdc/1min between the metal work

piece and the earth.

4. The curvature radius of the fiber 40mm, without extra loss inside the splice tray.

5. It can bear the axial tensile strength no less than 1000N.

6. Lifetime: 25 years.

7. Other performances are all in accordance with the requirement of standard YD/T814-1998.

SHENZHEN YINGDA PHOTONIC CO.,LTD. is a professional Fiber Optic Manufacturer and trading combo. We committed to provide customers with high quality FTTH solutions and satisfying service.

Our factory covers about 4000 square meters, and has strong strength in R&D, a technical team of many well known experts who has been committed to research and development of new products for many years. Also we have a first-rate quality inspection and measurement center and sound quality management system, and is equipped with many world class manufacturing equipment and measurement instruments.

With excellent quality, reasonable prices and on time delivery, our products have been widely applied by telecommunication operators,such as China Telecom,China Mobile and China Unicom; and have been sold to many countries and areas,including Russia,Korea,Taiwan area, Europe, Lanti America, South America, Southeast Asia, the Middle East,etc

Our advantage products: fiber optical distribution box, fiber termination box, optical fiber patch cord, fiber optic adapters, optical PLC splitter, Fast mechanical connectors, etc. Yingda can provide FTTH, ODN, GPON, FTTA solutions on customer request too. Hope we can help more customers win more market and get more profit.

Customer first, quality first is the foundation of our company's survival. In the spirit of mutually beneficial cooperation, two-way and win-win attitude to serve all types of customers.

Let optical fiber light up future life!