Wireline Pressure Control Equipment Alloy Steel Wellhead Joint 5K

Wellhead Joint Wireline Pressure Control Equipment Alloy Steel 2K

I. Overview
The wellhead joint is used to connect the blowout preventer and the wellhead, the upper part is connected with the blowout preventer, and the lower part is connected with the wellhead.
The wellhead joint is sealed by threads. When in use, wrap the PTFE tape on the thread or apply anti-sticking grease on the thread, and then screw the wellhead joint directly on the thread of the wellhead.
II, pressure test:
Wellhead joints should be subjected to regular compression strength tests, and the test pressure is 1.5 times the working pressure.
1. Install the pressure test connector and connect the pressure test pipeline;
2. Start the pressure test pump for pressure test: press to the test pressure, keep the pressure for 15 minutes without leakage, and fill in the test record card.
III, daily maintenance:
1. The withstand voltage test should be carried out regularly;
2. When not in use temporarily, you should bring the protective wire for storage.

Welcome to contact us at any time.

Baoji Ruixin Energy Equipment Co.,Ltd has only focused on the research and development and manufacturing of slickline equipment and tools, built a high-tech enterprise with excellence and pursued the professionalism and accuracy of products. Always follow the site, serve the site, and solve the site problems with rich experience and technology; Ensure the practicability of the product. To provide excellent equipment and sincere service for slickline service companies in China and other countries around the world.