GB Medical Scalpel 304 Stainless Steel Strip 2mm Coil BA Cold Rolled

304 BA Surface 2.0mm Thick Cold Rolled Stainless Steel Strip For Medical Scalpel

Strip steels are manufactured by hot rolling to thicknesses not less than 2 mm, and then finally cold rolled to the required final thickness. Since cold forming (e.g. by deep drawing, stretch forming or bending) is a widely used application for low-carbon strip steels, a final recrystallization anneal is applied.

Product information:

Chemical Position:

Physical Property:

Brand Cross Reference Table:

Surface Finish:

Packing:

304 BA Surface 2.0mm Thick Cold Rolled Stainless Steel Strip For Medical Scalpel packaging details :

1: Coils covered with waterproof protective packing materails ;

2: Then loaded in strong metal pallets +angle bar protection +steel strip ;

3: Well loaded and be transported to the loading port .

The innner size container as below :

1: 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM ;

2: 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM ;

3: 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM.

Stainless Steel Coil VS Stainless Steel Strip:

Strip steel is used for a variety of industrial applications.Typically strip steel is used in body panels and automotive components, tubes, appliances such as refrigerators,washers and dryers, building materials as well as electrical components.

There are no difference between coils and strips but the width.

Application:

You'll find strip steel used in appliances like refrigerators, washers, and dryers. The unique properties of strip steel have also made it a popular material for building and construction materials

Product Display:

WHY CHOOSE US:

Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will show you the photos of products and package before you pay the balance.

Q2: what is the terms of delivery?
A: FOB, CIF, CFR,

Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirement.

Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within 7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after receiving the deposit.

Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique drawings, we could build the mold and fixtures.

Q6: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is available in stocks, however, the the transportation fee is borne by buyer.