SufoTech Knife-Ring Flaker Pallmann Flaker Replacement

1200 mm 2.5~4 Tons Per Hour Flakes Making Knife-Ring Flaker for Paticle Board Production Line

0.7~14 Tons Per Hour Flakes Making Knife-Ring Flaker for Paticle Board Production Line

Description

A vibrating trough feeds the incoming material into the heavy-particle separator. The separator sorts out not only heavy particles but ferrous metals as well. The material to be chipped is then drawn into the centre of the cutting c

This is accomplished through an optimum interplay of knife protrusion, distance between knife and deflecting wall, and distance between knife and wearing pad.

The knife-ring flaker machine is one of the main machines in the preparation section of particle board production.

After the chipper cuts wood chips, bamboo chips, broken veneer, etc. into certain specifications of flakes, the knife-ring flaker makes them into flakes with certain thickness that meet the process requirements, which are used as raw materials for particle board. The flaker has formed a series of products with various specifications of knife ring diameters from 800 to 1600, which can meet the needs of particleboard production lines with an annual output of 30,000-450,000 m³.

Knife-ring flaker is wood, broken veneer as raw material, the planer cut into a certain thickness of particleboard, as the manufacture of particleboard raw material, BX468 planer is suitable for annual output of 15,000 ~ 30,000 meters of particleboard workshop preparation of particleboard.

Planer is composed of frame, cutter wheel, impeller, vibration feeding, magnetic separation, heavy separation, hydraulic system, braking system and electrical control system. It is one of the main machines of particleboard production and preparation section.Wood chips, bamboo chips, broken veneer and other raw materials are planed into a certain thickness of the core layer of coarse particleboard as raw materials.

Structure of knife-ring flaker

1 Multi-stage structure for heavy object separator which will seperate wood chips with lenth of 60~120mm.

2 The adjustment device for wind to make the suspension wind speed the same.

3 Distribute wood chips uniform across the width of the knife ring.

4 Effectively control the protruding amount of the flying knife and the gap between the knife door to ensure uniform thickness of flakes.

5 New type of impeller to lower the enger consumption.

Main technical data

Suzhou Forestry Technologies Co., Ltd. specializes in plywood, MDF/HDF, particle board, OSB production lines, key machines, spare parts and chemical.