HT 8962 High performance PU Sealant Adhesive for car windshield glass SI262

HT 8962 High-performance PU Sealant for car windshield glass, SI262

Product Description:

8962 High-performance PU Sealant is one-component, moisture curing sealant. Fast curing, low odor polyurethane adhesive. After cured is rubber elastomer, has the good properties, such as hot & cold resistance, resistance to stress changes. Apply to manual dispenser and easy to operate.

Typical Usage:

Suitable for car windshield glass block before and after, bus and all kinds of vehicles, ships, flexible bonding and sealing.

Technical Data:

Instructions:

1. Clean the thread surface, eliminate greasy dirt, water and dry it.

2. Open a suitable cutting hole on the cartridge, the inner diameter of the hole should be depending on the sizing width, into the glue gun.

3. Need to cooperate with specified into HT8906 Primer Coating or 8902 Activator, glass treatment agent is used.

4. Environment temperature and humidity has a great influence on product curing time. Low temperature will caused slow curing, high temperature and humidity with fast curing. Best operating environment condition is: temperature 20 ~ 30 ℃ and humidity 50 ~ 70% RH.

5. If the glue not use up, please tight blocks and sealed nozzle immediately. If there is a little crust in the mouth of tube, remove it, it will not affect the normal use.

Announcements:

This product must be stored far away from children.

If you carelessly touch eyes and skin, please wash it with water immediately.

Packing specification:

310ml/cartridge, 24cartridges/ carton

600ml/sausage, 20sausages/carton

240kg/drum, 2drums/pallet

Storage:

Stored in 8～28℃ cool and dry place.

Shelf life:

Cartridge package is 9 months;

Sausage package is 6 months.

Drum package is 6 months

Huitian New Material (stock code: 300041) is the oldest enterprise in China's adhesive & new material industry, with 46 years of development history, focusing on research and development, constantly breaking through the innovative technology of adhesive new material, taking the lead in solving the problem of necklace. With over 2,000 products spanning six disciplines, our offerings find extensive application in new energy, transportation, 5G communication, consumer electronics, aerospace, and beyond. We are committed to delivering new material one-stop solutions for high-end manufacturing industry head customers.

Huitian New Material has 6 R&D bases in Shanghai, Guangzhou, Xiangyang, Yicheng, and Changzhou, as well as industrial bases in Vietnam, providing customers with a stable supply of multi-series, high-quality products, and possessing a large-scale manufacturing capacity; the existing core R&D team consists of more than 300 people with PhDs and master's degrees, and it is the first "National Enterprise Technology Centre" in the domestic adhesive new material industry. Huitian New Material has been continuously investing in R&D for a long time, a joint development with customers, and forward-looking product reserve, constantly refining sustainable R&D capability; Huitian people's high-efficiency organizational force quickly responds to customers' needs and empowers and adds value to customers' products.

Huitian New Material was founded in 1977. Its predecessor was the earliest domestic research unit engaged in the research and development of adhesives. It is also a private high-tech enterprise transformed by a batch of research institutes in the country according to market-oriented operation. The company has a deep professional and technical accumulation and has been identified as a provincial-level post-doctoral industrial base and a national-level post-doctoral scientific research workstation.

In 2012, Huitian and the Chinese Academy of Sciences jointly set up the "High-Performance Adhesive Material Engineering Technology Center".

In 2013, Huitian Group inaugurated a new base and R&D center at its Shanghai headquarters to create a world-class adhesives R&D center.

In 2015, Huitian was awarded the National Enterprise Technology Centre jointly recognized by the National Development and Reform Commission, Ministry of Science and Technology, Ministry of Finance, General Administration of Customs, and General Administration of Taxation.

In 2017, Huitian Vietnam Yueyou Co., Ltd was established to start the road of overseas expansion.

In 2019, the Huitian Group set up overseas offices in Europe, America, and Southeast Asia to accelerate its overseas business development.

In 2022, Huitian New Material Japan Co., Ltd was founded and Huitian Vietnam Yueyou Co., Ltd opened a new office in the north part.

In 2023, Vina Evergreen Advanced Material Company Limited was established to invest in the overseas market, localization starts at the same time as internationalization.

In 2024, the Vietnamese factory of Huitien New Material starts production in BW Industrial Zone, Hai Duong, Vietnam, taking the first step toward overseas production.

Huitian New Materials has successively won the key high-tech enterprises of the National Torch Plan, China's well-known trademarks, China's Top 10 Most Valuable Investment Values, China's Adhesive Products Customer Satisfaction Brand, China's Top Ten Innovative Materials Enterprises, Patent Pilot Enterprises, and A series of precious honors such as honest taxpayer unit. The company has donated more than 20 million yuan to society and won the "Outstanding Contribution Award for Chinese Charity" twice.

Vision

Become the preferred expert for customers in adhesives and new materials

Bent on catching up with the world's advanced-level

Mission

Industry Serves the Country, Repays the Society

Values

Customer-centric, striver-oriented

Long-term hard work and continuous self-criticism

Culture

Competition, Reward, Innovation, Gratitude