BP156TC Pressure Transmitter
Introduction of industrial pressure sensor transmitter:
BP156TC industrial pressure sensor transmitter using ceramic sensor
core as signal measuring element. The signal processing circuit is
located in the stainless steel housing and converts the sensor
signal to the required 4-20mA or 0.5-4.5V standard output signal.
Product components, semi-finished products, finished products
through strict testing and aging screening to ensure stable and
reliable performance. Ceramic sensors greatly reduce costs for
pressure measuring environments with low overload requirements.
Product Features of industrial pressure sensor transmitter:
1. Wide measuring range, stainless steel structure, diverse
pressure interface forms
2. IP65 protection rating stainless steel structure
3. High precision, all stainless steel structure
Applications of industrial pressure sensor transmitter:
1. Pressure measurement of non-corrosive gases and liquids with
316L stainless steel
2. Applied in the marine and aviation industries
3. Used in industrial on-site processes such as petroleum,
chemical, metallurgy, power generation, and hydrology
4. Utilized in hydraulic and pneumatic control systems.
| Performance Parameters of industrial pressure sensor transmitter: |
| Measurement Range | 0kPa ~ 500kPa…5MPa |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typ.) ±0.5% (Max.) |
| Repeatability& Hysteresis | 0.02%F.S(Typ.) 0.05%F.S(Max.) |
| Long-Term Stability | ±0.1%F.S/Year(Typ.) ±0.2%F.S/Year(Max.) |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex ia IIC T6 Ga |
| Protection Rating | IP65 |
| Weight | ~0.20kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
| Ordering tips of industrial pressure sensor transmitter |
1. When selecting the product, please ensure that the tested medium
is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products
do not include digital display heads.
3. To ensure the reliable operation of the product, you are advised
to install lightning protection devices on site and ensure that the
product and power supply are grounded reliably.
4. The rated operating temperature range of fluorine rubber O-ring
is -20℃~ 250℃. When the operating temperature of the product is
lower than -20 ° C, EPDM O-type sealing ring should be selected.
5.If there is no special instructions, the product does not have a
line, must have a line structure, the default length of the product
cable is 1.5m, there are three materials to choose from. If there
are no special instructions, polyethylene cable materials can be
used. If you need a different cable material, please specify it in
the order form.
6. In case of special requirements such as strong vibration,
instantaneous impact force, strong electromagnetic or RF
interference, please inform us and indicate in the order.
| Order Guide of industrial pressure sensor transmitter |
| BP15X | Analog Pressure Transmitter |
| Code | Outline Construction |
| 5 | Packard plug | 6 | Sealed Direct Output Cable 1.5 meters |
| 7 | Mini Hirschmann Connector | 8 | Large Hirschmann Connector |
| Measurement Range | 0kPa ~ 10kPa…5MPa |
(0-X)Kpa
or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal | |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Others(¢50.4 Flange) |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 |
| B3 | Cable Sealed Outlet 1.5 meters |
| B4 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
HT sensor Wide Measurement Range BP170 Pressure Transmitter sensor for Process Control
