30ft 45ft 50ft 55ft 60ft Telescopic Carbon Fiber Pole For Window Cleaning Pole

30ft 45ft 50ft 55ft 60ft Telescopic Carbon Fibre pole For Window Cleaning Pole

Cleaning a telescopic pole, such as those used for window cleaning, painting, or other tasks, is important to maintain its functionality and appearance. The cleaning process can vary depending on the material of the pole and the type of dirt or debris you need to remove. Here's a general guide on how to clean a telescopic pole:

Materials Needed:

1. Telescopic pole
2. Bucket of warm, soapy water
3. Soft-bristle brush or sponge
4. Mild detergent or dish soap
5. Towels or cloths
6. Hose (optional)

Steps:

• Extend the Pole: Fully extend the telescopic pole to its maximum length. This will make it easier to access all parts of the pole.
• Remove Loose Debris: Shake the pole or tap it gently to remove loose dirt, dust, or debris.
• Soapy Water: Fill a bucket with warm water and add a small amount of mild detergent or dish soap. Mix it to create soapy water.
• Cleaning: Dip a soft-bristle brush or sponge into the soapy water and scrub the entire surface of the pole. Pay extra attention to any dirty or stained areas. If you have a telescopic pole made of metal, this step can help remove dirt, grease, and grime.
• Rinse: If you have access to a hose, rinse the pole thoroughly to remove soap residue. If a hose is not available, you can use a clean cloth or sponge dipped in clean water to wipe away the soapy residue.
• Dry: Wipe the telescopic pole with a dry towel or cloth to remove excess water. Make sure it's completely dry, especially if the pole is made of metal to prevent rust.
• Inspect for Damage: While cleaning, check the pole for any signs of damage, such as dents, cracks, or loose parts. If you find any issues, consider repairing or replacing the damaged components.
• Lubricate (Optional): If your telescopic pole has moving parts, such as clamps or locks, you may want to apply a small amount of lubricant (e.g., silicone lubricant) to keep them functioning smoothly.
• Store Properly: Once the telescopic pole is clean and dry, store it in a cool, dry place. Keep it retracted when not in use to prevent dust and dirt from accumulating on the extended sections.
• Regular cleaning and maintenance of your telescopic pole can extend its lifespan and ensure that it functions as intended. The frequency of cleaning may depend on how frequently you use the pole and the environmental conditions it is exposed to.

Specifications:

Order Flow

• Tell us the size of carbon fiber products, including length, diameter, width, and thickness, etc. if you have specific requirements, Pls let me know. It is better that you have a file/drawing(.dwg /.stp/.igs format ) to describe your request.
• We will analyze your request, supply you best solution then give you the best price.
• You received the price and arranged samples for us.
• We will prepare a sample for you, Normally it will take about 3~7 working days. Then we deliver the sample to you for the test.
• You received a sample and test okay. Then arrange formal order to us.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.