Frosted Milky White Frosted Perspex Sheet Custom 3mm Plastic Plate

Frosted Milky White Frosted Perspex Sheet Custom 3mm Plastic Plate

3mm acrylic frosted sheet milky white perspex plastic plate cut to size

1. How to use acrylic shadowless glue
1. Facade bonding Facade bonding is the most widely used bonding technology. The surface to be bonded should be wiped clean first. It is best to use a master to achieve bonding, so that the bonded object does not shake, which is beneficial to improve the quality of bonding. The plexiglass plate with a thickness of 3mm is bonded, and the thin metal wire can be placed in it, and the bonding is completed by capillary action, and the metal wire is pulled out before the adhesive is cured. Or you can use tape to protect the parts that do not need to be adhered, leave the parts where the adhesive is coated with adhesive, and then put it diagonally into the plexiglass plate to squeeze out the bubbles.

2. Plane bonding Plane bonding is a relatively special bonding method. First, wipe the surface to be adhered clean and place it horizontally, and pour an appropriate amount of adhesive on the surface. Place one side of the other plexiglass plate diagonally in contact with the plexiglass plate coated with the adhesive, and then put it down evenly and slowly to drive out the air bubbles from one side to complete the bonding.
3. Bevel bonding The bevel must use a 90-degree angle mold to prevent the displacement of the bonded surface. The adhesive should be applied evenly and slowly. The master form can only be removed after it is completely cured.
4. Docking Put the two plexiglass plates to be docked horizontally on the operating platform and close them, and stick a tape on the bottom, leaving a gap no larger than 0.3mm wide for the application of adhesive. Then use a syringe to inject the adhesive from one side evenly and slowly from the gap until it is fully filled, and remove the tape after it is completely cured.
Precautions
This product contains methacrylic acid and its ester monomers, which are slightly irritating to the skin and eyes. If accidentally splashed into the eyes, please rinse with plenty of water immediately. If you still feel unwell, you must go to the hospital for inspection;
The ideal thickness of the adhesive layer during bonding is 0.01-0.05mm, too thin or too thick will affect the bonding performance.
Do not move the material back and forth when irradiated with ultraviolet rays, otherwise it will easily cause the whitening of the adhesive layer and the decrease of the bonding strength.

2.Parameter

3. What glue is used to bond the acrylic sheet

Acrylic shadowless adhesive is used for bonding plastics and various materials with excellent bonding effect; high bonding strength, the damage test can achieve the effect of plastic body rupture; flexible formula, no internal stress cracking phenomenon after curing , Excellent resistance to low temperature, high temperature and high humidity; fast curing speed, positioning in a few seconds, reaching the highest strength in one minute, greatly improving work efficiency; completely transparent after curing, the product will not yellow or whiten for a long time; compared with traditional Instantaneous adhesive bonding has the advantages of resistance to ring testing, no whitening, and good flexibility; it can be dispensed by automatic mechanical glue or screen printing, which is convenient for operation. Methyl chloride is just "chloroform", which is generally used for bonding. Available in chemical stores

4. XH Company and Production Line

5. Package and shipping

7.1. One piece of acrylic sheet package: double-sided covered with kraft paper or PE film, the cover film does not have any LOGO of our company.
7.2. Tray package: the total weight of each pallet is about 2 tons, the bottom is wooden pallet or iron pallet, and the surrounding is packed with corrugated paper.
7.3. The packaging method of the whole container: 20-23 tons (about 3000 pieces) 20-foot container, 10-12 pallets.

   Shenzhen XH Technology is a company specializing in the research and development, production and sales of plexiglass sheets and related products. Currently, it has two production bases: the Dongguan production base has two new acrylic sheet production lines for casting; the Foshan production base has four extrusion lines. Extruded acrylic sheet production line. The two production bases owned by the company have a total monthly production capacity of 1,200 tons of acrylic sheets for pouring and extruding, ensuring that your needs can be met in time.

   Company Qualification Description: The company has been engaged in the acrylic industry for decades and has a professional R&D team. Our factory production is in compliance with international standards ISO 9001, CE and SGS.

   XH company adheres to market-oriented, technological innovation as the foundation, and independent products as the core. With years of in-depth research in the application field of acrylic products, the company has developed high-performance acrylic light guide plates, sound screen panels, There are 12 series of products such as bathroom panels, diffuser panels, acrylic lenses, etc., which are widely used in advertising, signage, craft products, optical instruments, medical equipment, rail transit, scientific research and other fields.

   Our acrylic sheets are exported to Europe, America, Southeast Asia and other parts of the world, and the market covers more than 60 countries such as the United States, Australia, Mexico, the United Arab Emirates, Poland, Brazil, Russia, and Switzerland. With a good reputation and a marketing service system close to the market, we have won more and more customers.

   XH company has strong plastic product technology and research and development capabilities, and cooperates with many world-renowned companies, scientific research institutes, and colleges and universities to develop and produce various high-quality products to meet the specific needs of different customers. Strict quality control, introducing the most advanced machines and instruments from world-renowned companies, we are confident to provide customers with quality products