Round Carbon Fiber Tube 1.8mm 2mm 3mm 4mm 5mm 6mm OD 200mm 400mm Long

Carbon Fiber Tube 1.8mm 2mm 3mm 4mm 5mm 6mm OD 200mm & 400mm Long Round

Carbon fiber tubes are cylindrical structures made from carbon fiber-reinforced polymer composites. Here's an overview of carbon fiber tubes in a more general sense:

Material Composition: Carbon fiber tubes are composed of layers of carbon fibers embedded in a polymer matrix, typically epoxy resin. These fibers provide strength and stiffness, while the matrix holds them together and transfers loads.

Features and Benefits:

• High Strength-to-Weight Ratio: Carbon fiber tubes are known for their exceptional strength-to-weight ratio, making them lightweight yet incredibly strong and rigid.
• Stiffness and Rigidity: Carbon fiber tubes exhibit high stiffness and rigidity, making them resistant to bending and deformation under load.
• Low Density: The low density of carbon fiber composites contributes to their lightweight nature, which is beneficial for weight-sensitive applications.
• Corrosion Resistance: Carbon fiber tubes are highly resistant to corrosion, making them suitable for use in harsh environments.
• Fatigue Resistance: Carbon fiber composites have good fatigue resistance, allowing them to withstand cyclic loading without premature failure.
• Customizable Properties: The arrangement and orientation of carbon fiber layers can be customized to achieve specific mechanical properties.
• Aesthetic Appeal: The woven pattern of carbon fiber is visually appealing and often adds a high-tech and premium appearance to products.
• Electrical Conductivity: Carbon fibers are electrically conductive, which can be advantageous in applications requiring electrical grounding.

Applications:

Carbon fiber tubes find applications in various industries and fields, including:

1. Aerospace: Used in aircraft structures, satellite components, and UAVs due to their lightweight and high-strength properties.
2. Automotive: Used in racing cars, luxury vehicles, and electric cars to reduce weight while maintaining performance.
3. Sports and Recreation: Used in bicycle frames, fishing rods, golf clubs, and other sporting equipment to enhance performance.
4. Industrial: Used in robotics, automation, and machinery to provide lightweight yet sturdy components.
5. Marine: Used in boat and ship construction due to their corrosion resistance and lightweight nature.
6. Medical: Used in orthopedic devices, prosthetics, and medical equipment where lightweight and strong materials are needed.
7. Renewable Energy: Used in wind turbine blades and other renewable energy applications due to their durability and lightweight properties.

Remember that the specific features and benefits of carbon fiber tubes can vary based on the manufacturing process, quality of materials, and intended application.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.