30000psi Explosion Proof Pressure Water Jet Pump Zone 2 With DNV2.7.1

• The structure:

The main parts are: triplex high pressure reciprocating pump, electric engine, water tank, inlet water hose, and cleaning accessory, electric control cabinet.

• Electric engine: we use 3 phases 4 poles asynchronous motors,and also optional use the model 60HZ different voltage, explosion-proof or frequency electric engine according to the client’s request.
• Electric control cabinet: the main function of it is to start, stop, and the protection of phase failure and over charge. Factory sets for 80% step-down start, in order to reduce the harm of current start-up, since the transformer wire decoupling reserve 65% of wiring end, customers can adjust according to oneself circumstance power

• Triplex high pressure reciprocating pump: It is triplex plunger pump, and the working principle and maintenance please see the operation manual of high pressure pump.
• Water tank: water tank is the device of storing water and filter. There are two filtering clapboards, and it should check for some times. The place of the water must higher than the high pressure pump, in order to exclude the air of inlet pipeline.

4. Cleaning accessory: there are many kinds of cleaning accessory; it should match according to the client’s request. The usual are: high pressure hoses, high pressure pipes, foot control valve, spray guns, etc.

High pressure hoses are the main safe parts of the washer; it must use the supporting products. Before use, it must be checked, and if there are some wearing parts, it should be rechanged. Fixed the joint, in case of loosing.

The high pressure pipes usually in a fixed place, which made from the stainless steel extra high pressure, and installed in a fixed pipe way. When installation, it should match with the limit valve and globe valve, and control box.

Foot control valve is used in the pipelines, containers, rotary kiln of cement plant, sometimes used in as the twin gun switch valve operation. When use the special accessories such as spray boom, rotating nozzle, it should use the foot control valve to realize the control of water jet change. When loose the valve, the water jet.

Spray gun is the pump’s change energy parts, for considering the safety, usually, it is overflow spray guns, that means there is a overflow pipe, when close the spray gun, it overflows, and unloading the high pressure pump.