Features;
1.Seamless steel pipe for precise processing, balance treatment for
stable running, grinding and hard chromed
2.Impression cylinder gap adopts adjustable offset ring, with close
structure, precise positioning, adjustment scope: 0-12mm.
3.Up feeding roll: grinded and hard chromed.
4..Lower feeding roll: grinded, sand-frosted and hard-chromed.
5 .Lower feeding shaft gap adjustment adopts offset ring with close
structure, correction positioning, adjustable at 0-12mm.
6.Seamless steel pipe for precise processing, balance treatment for
stable running, grinding and hard chromed.
7.Impression cylinder gap adopts adjustable offset ring, with close
structure, precise positioning, adjustment scope: 0-12mm
8.Up feeding roll: grinded and hard chromed.
9.Lower feeding roll: grinded, sand-frosted and hard-chromed.
10.Lower feeding shaft gap adjustment adopts offset ring with close
structure, correction positioning, adjustable at 0-12mm.
11. Seamless steel pipe for precise processing, balance treatment
for stable running, grinding and hard chromed
12.Steel pipe rubber-coated durable for longlife.
13 .Super clutch and auto empty run device against ink dry.
14 .Midheight grinding for high LPI big space printing.
15 . Rubber roll open/close adopts worm gearbox manual adjustment,
with worm gearbox for gap adjustment with scale indication
16. Seamless steel pipe for precise processing, balance treatment
for stable running, grinding and hard chromed.
17.Longlife running, anti-grinding and erosion, ideal ink
transferring and controlling performance.
18.Pneumatic anilox auto elevation device and empty run device.
19.Speed difference between anilox roll and rubber roll for ink
doctoring effect to increase printing quality.
20.Single-way pneumatic membrane auto circulating pump.
21 . Ink filtering net to filter the dirt for nice printing result.
22 .Encased ink chamber.
23 .Satelite gear wheel design.
24 .Motorized circumferential adjustment, digital display, 360
degree run or stop adjustment.
25 .PLC control, quick reach, convenient for cliché adjustment.
26. Manual gap Pressure adjustment for all units.
27. Electromagnetic braking structure.
28. When machine unit separates or adjust phase, braking system to
control the running of machine units to keep original gear
positioning point.
Sheet size | 1800X4200mm |
Design speed: | 80pcs/min. |
Max. working speed: | 60pcs /min.(by sheet size and quality) |
Max.working size: | 1800X4200 |
Skip feeding size: | 2100mmX4500mm |
Min.sheet size: | 350mmX600mm |
Max.printing area: | 1800X4000mm |
Cliché thickness: | 7mm |
Slot width x Slot depth: | 7mmX400mm |
Max. paper thickness | 10mm |
Slotting accuracy | ±1.5mm |
Printing registration(medium speed): | ±0.5mm |
Mesh mode: | Optional(120-250LPI) |
Dimension of the whole machine | 20200(L)x4600(W)x2800(H)mm |
Total power(KW) | 60KW |
Total weight(Ton) | 70TONS |
C. Rotary Die Cutter
1.OD: 530mm
2.Mat cylinder uses high quality steel, grinding, hard chromed.
3.Balance treatment for stable running.
4.Rubber mat thickness 8mm, width 250mm.
5.Rubber mat cylinder mechanical rotary direction change 40mm
distance movement structure, movement speed same as the machine
running speed.
6.Motorized adjustment of die cutting mould gap, adjustment range:
0-16mm.
7.OD:ø600mm(with die cutting mould thickness);without mould: ø
550mm.
8.Die cutting cylinder is made by high quality steel, fine
grinding, hard chromed.
9. Balance treatment to increase stable running.
10.Die cutting mould fixation screws M10, hole distance at 100mm at
transversal direction and 18 equal units at circumferential
direction.
11.Die cutting wooden mould thickness 13-15mm(five ply),
16-18mm(three ply).
D .Vibration Stripper Auto Stacker
1.Photocell sensor system to control table elevation, auto
elevation according to paperboard stacking height, table elevation
transmission with braking function and safety device to ensure
fixed position.
2.Pneumatic adjustment of paperboard stacking arm.
3.Stacking arm rotates belts, separate adjustment of belt tension,
not limited by belt length
4.Powerful transferring belts to guarantee friction and long life.
5. Pneumatic cylinder control.
6. Auxilliary board delivery device for non-stop delivery.
7. Pneumatic stacking board for temporary support, manual
adjustment of back buffle position.
8. To remove the die cutting waste by the belt vibration action.