GE IC693CMM302 COMMUNICATIONS BETWEEN A SERIES 90-30 PLC AND UP TO 31 OTHER DEVICES

GE IC693CMM302 COMMUNICATIONS BETWEEN A SERIES 90-30 PLC AND UP TO 31 OTHER DEVICES

Product information GE IC693CMM302 :

The GE Fanuc IC693CMM302 is an Enhanced Genius Communications Module. It is quite commonly know as GCM+ for short. This unit is an intelligent module which enables automatic global data communications between any Series 90-30 PLC and up to a maximum of 31 other devices. This is done on a Genius bus.

It is possible for the IC693CMM302 GCM+ to be installed on a number of different baseplates, including expansion or remote baseplates. That being said, the most efficient performance of this module can be achieved by installing it in the CPU baseplate. This is because the sweep impact time of the module is dependent on the PLC model and varies according to which baseplate it is located in.

Users must note that if a GCM module is already present within a system, they will not be able to implement the GCM+ module. It is actually possible to have multiple GCL+ modules in a single Series 90-30 PLC system. Each GCM+ module can have its own separate Genius bus. In theory, this would enable a Series 90-30 PLC (with three GCM+ modules installed) to automatically exchange global data with up to 93 other Genius devices.

Additional uses for the IC693CMM302 GCM+ module include data monitoring of PCs or industrial computers and peer-to-peer communications between devices on the bus. On the front of the IC693CMM302 GCM+ unit, there are LEDs to show the operating status. These will be switched on if everything is operating normally. The LED marked COM will blink intermittently if there any bus errors. It will turn off if the bus has failed

The IC693CMM302 module is an enhanced Genius communications module manufactured by GE Fanuc Automation and it belongs to Series 90-30. This communication module is specially intended for use as a GCM device, and it can communicate with the global data between several devices at a time. This module is part of the GE Fanuc Series 90-30 PLC along with 31 other units which are connected to the Genius Bus. The operators are advised to install the GE Fanuc IC693CMM302 communication module on the baseplate of the PLC system CPU to enable efficient operation. However, it can also be installed on the expansion baseplates or remote baseplates in the same system. The enhanced Genius communication modules do not support installation in the PLCs which have regular GCMs in them.

Several GE Fanuc communications modules, including the IC693CMM302 enhanced Genius communication module, each have a distinct Genius bus and they can connect with or communicate with a maximum of 31 other devices simultaneously, and they also allow for installation in a PLC system. For instance, the Series 90-30 GE Fanuc PLC systems comprise 2 enhanced Genius communications modules, and it allows for communication with up to 62 other devices concurrently.

The GE Fanuc IC693CMM302 communications module is often used for the exchange of global data, and it can also handle tasks such as peer-to-peer communication, data monitoring through a personal or industrial computer, data monitoring from the Genius I/O blocks, and master-slave communication between the Bus devices. These communication modules have no ability to control the I/O blocks in the PLC.

More information:

IC693CMM302 's details:

Another module:

IC694MDL230	120 VAC Isolated Input (8 Points)
IC694MDL231	240 VAC Isolated Input (8 Points)
IC694MDL240	120 VAC Input (16 Points)
IC694MDL241	24 VAC/VDC Input (16 Points)
IC694MDL250	120 VAC Isolated Input (16 Points)
IC694MDL260	120 VAC Input (32 Points)**
IC694MDL632	125 VDC Input (8 Points)
IC694MDL634	24 VDC Input, Neg/Pos Logic (8 Points)
IC694MDL645	24 VDC Input, Neg/Pos Logic (16 Points)
IC694MDL646	24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points)
IC694MDL654	5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points)
IC694MDL655	24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points)
IC694MDL660	24 VDC Input (32 Points)**
IC694ACC300	Input Simulator Module (8 Points)

Our brand:

    Wisdomlong Technology CO.,LTD locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices.

    Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

    The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.