Super Neodymium Magnet NiCuNi Coating Sintered Disc Shaped Magnets

Super Neodymium Magnet N35-N52 Custom Round Disc NdFeB Magnets

There are many levels of NdFeB magnets

Which coating is the best for your magnet?

NiCuNi coating: The nickel coating is composed of three layers, nickel-copper-nickel. This type of coating

is the most widely used and provides protection against corrosion of the magnet in outdoor situations.

Processing costs are low. The maximum working temperature is approximately 220-240ºC (depending on

the maximum working temperature of the magnet). This type of coating is used in engines, generators,

medical devices, sensors, automotive applications, retention, thin film deposition processes and pumps.

Black nickel: The properties of this coating are similar to those of the nickel coating, with the difference

that an additional process is generated, the black nickel assembly.

Zinc: If the maximum working temperature is less than 120°C, this type of coating is adequate. The costs

are lower and the magnet is protected against corrosion in the open air. It can be glued to steel, although

a specially developed adhesive must be used. The zinc coating is suitable provided that the protective

barriers for the magnet are low and low working temperatures prevail.

Epoxy: A coating that provides an excellent barrier against salt and water. There is a very good adhesion

to steel, if the magnet is glued with a special adhesive suitable for magnets. The maximum working

temperature is approximately 150 ° C. Applications can be found in the maritime sector, engines, sensors,

consumer goods and the automotive sector.

Monte-Bianco Magnets Co., Ltd. is located in Changsha, Hunan Province. With more than 1000 skilled employees, the company has an annual production capacity of 2000 tons. Our company is able to supply a full range of products. It has been equipped with entire production capacity of product development, mold development and manufacturing, block production, finished product processing, surface treatment and other processes under fully controlled and managed process. At present, we have obtained 25 patents, and passed ISO9001, IATF16949 and ISO1400 management system, as well as passed RoHS directive. Products include a full range of grades: N35-N54, 35M-52M, 33H-52H, 30SH-50SH, 28UH-50UH, 30EH-42EH, 28AH-38AH. Our products are widely used in power tools, new energy vehicles, energy-saving motors, wind power generation, high-end audio and other fields. "Innovation, integrity, respect, passion, responsibility, win" is the core values of corporate culture, "continuous innovation" is the soul of the enterprise. The company will work hand in hand with all partners in the society to move towards a bright future.